Select your vehicle
-13%

4 Wheel Parts Factory Bronco 2.5″ VSRT Front Coilovers – 52233BX-1

4 Wheel Parts

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 4 Wheel Parts 52233BX-1 Factory Bronco 2.5-inch VSRT front coilover
  • Fits 2021–2026 Ford Bronco in Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims
  • Gas charged, hard-anodized body with 17-4 PH stainless steel shafts
  • Vehicle Specific Ride Tuning, per 4 Wheel Parts

Description

Overview

The 4 Wheel Parts 52233BX-1 is a front coilover for the 2021–2026 Ford Bronco. It belongs to the 4 Wheel Parts Factory Bronco line, which 4 Wheel Parts says is designed to increase off-road capability and give a distinct look. It is a gas charged coilover with a 2.5-inch body diameter.

The body is a hard-anodized, thick-wall impact forging, which 4 Wheel Parts says improves appearance and reduces friction and bore wear. The shafts are 17-4 PH stainless steel, precipitation hardened and chrome plated for corrosion and abrasion resistance.

The coilover uses Vehicle Specific Ride Tuning (VSRT), which 4 Wheel Parts says is tuned for maximum ride quality on the road and performance off road.

Key features

  • Gas charged design
  • 2.5-inch body diameter
  • Hard-anodized body
  • 17-4 PH stainless steel shafts, chrome plated
  • Vehicle Specific Ride Tuning
  • Front position
  • Direct fit

Gas charged coilovers explained

A gas charged coilover combines a coil spring and a shock absorber in one unit. The gas charge helps keep damping consistent when the shock heats up during long descents or repeated bumps. Coilovers also let the spring and damper be set as one assembly, which simplifies fitting compared with separate parts.

Ride quality and off-road control depend on damping and spring rate together. A firmer setup can improve body control on rough trails but may feel harsher on pavement, so consider how you drive most often. After fitting, check the alignment, the brake line clearance and the shaft seals for leaks. Keep the shafts clean, since grit can wear seals faster.

  • Clean the shafts after mud or sand
  • Check seals for weeping
  • Inspect mounting hardware after rough trips
  • Re-check alignment after install

Specifications

Brand 4 Wheel Parts
Part number 52233BX-1
Position Front
Shock type Coilover
Charge Gas charged
Body diameter 2.5 inches
Shaft 17-4 PH stainless steel, chrome plated
Body finish Hard-anodized
Fitment type Direct fit

Vehicle fitment

It fits the 2021–2026 Ford Bronco in Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.

The list does not include the Bronco Sport or the 2020 and earlier Bronco. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A coilover changes the front ride height and damping, so have the alignment checked after installation.

What’s included

One front coilover. Check the spring and mounting hardware against your installation before starting.

Fitment

VehicleYearsTrims
Ford Bronco2021–2026Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks, Wildtrak

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 4WP 52233BX-1 fit a 2022 Ford Bronco Wildtrak?

Yes. It fits the 2021–2026 Ford Bronco Wildtrak, which covers 2022 models. Badlands, Base, Big Bend, Black Diamond, First Edition and Outer Banks trims are also covered.

Is the 52233BX-1 a front or rear coilover?

It is a front coilover, fitted at the front position only. Its body diameter is 2.5 inches, and it is a gas charged design.

What is the VSRT tuning?

4 Wheel Parts says Vehicle Specific Ride Tuning means the coilover is tuned for ride quality on the road and performance off road, set for the Bronco.

How should a coilover be cared for?

Rinse the shafts after off-road use, especially after sand or mud, and wipe them dry. Inspect the seals for oil residue and check the mounting bolts periodically. Replace damaged seals early to keep the damper working properly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon