Overview
The Icon Suspension 1 inch block kit, part number 191201, is a rear lift block kit for 1999 to 2016 Ford F250 and F350 SD trucks. It is a direct fit kit and includes center pins.
ICON Vehicle Dynamics builds aftermarket suspension components for trucks and SUVs, and the brand says every product is made in the USA. Its engineering work includes testing components in both real world applications and race conditions.
Key features
- Rear position block kit
- 1 inch lift height
- Center pins included
- Direct fit for 1999 to 2016 Ford F250 and F350 SD, per the brand
- Made in the USA
Leaf spring block basics
A leaf spring rear block raises the axle by sitting between the spring and the axle seat. The center pin locates the spring in its seat so the block stays aligned, which matters because a shifting block can change the rear geometry quickly. Check that the spring pad is clean and that the pin sits squarely before tightening the hardware.
Blocks change driveline angles, so an installer usually checks the driveshaft once the rear is raised. Shocks, brake lines and sway bar links may also need attention. Plan to recheck the hardware after the first drives, and inspect the spring and pin for cracks or wear at each service.
- Confirm the center pin seats squarely
- Check driveshaft angle after installation
- Recheck hardware after the first drives
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 191201 |
| UPC | 70000750399 |
| Lift height | 1 inch |
| Position | Rear |
| Included hardware | Center pins |
| Fitment | Direct fit |
| Manufacturing | Made in the USA. |
Vehicle fitment
It fits 1999 to 2016 Ford F250 and F350 SD trucks as a direct fit. Trucks from other years, including later Super Duty generations, are not covered by that fit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Center pins are included. Check the package contents against your installation to confirm the quantity and any other hardware you need.





