Overview
The Pro Comp Suspension 95-254FB is a 2.5 inch rear lift block kit made from tapered lift blocks. Pro Comp designed it to achieve rear lift on a leaf spring equipped vehicle while keeping the driveshaft angle.
Key features
- 2.5 inch rear lift
- Tapered lift blocks
- Kit for leaf spring equipped vehicles
Tapered blocks and leaf springs
Tapered blocks are used because the spring and axle are not always parallel after a lift. The taper lets the block sit flat against the spring pad while the driveshaft keeps a more workable angle. Blocks like these are often used when a leaf spring setup needs more height without changing the spring itself.
Before fitting a kit, inspect the leaf springs, spring pads, and U-bolts for wear or cracks. Check that the block orientation matches the taper direction, since reversing a tapered block changes the angle. Recheck the hardware after the first few drives, and look at the driveshaft for vibration. Keep the old parts until the fit is confirmed. Keep the kit’s parts together and labeled so the orientation is clear during the install.
Brake hoses, sway bar links, and shock mounts should be checked for stretch once the kit is installed.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 95-254FB |
| UPC | 614901108545 |
| Lift height | 2.5 in |
| Position | Rear |
| Taper | Tapered |
| Sold as | Block kit |
Vehicle fitment
It is a universal fit kit. Confirm your spring pack and axle setup before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The rear lift block kit.






