Overview
The Corbeau Toyota Seat Bracket with Double Locking Sliders, part number CBUE2227, is a passenger side seat bracket for the 2007–2021 Toyota Tundra. It is designed to bolt directly to the vehicle with little to no modifications and to mount a Corbeau seat in the passenger position.
These brackets are designed for Corbeau seats and will not work with other seat brands. The double locking sliders are joined by a bar, and you pull up on the bar to slide the seat forward and back. Bracket fit matters as much as the seat itself in any aftermarket installation.
Key features
- Double locking sliders joined by a connecting bar; pull up on the bar to slide the seat forward and back
- Direct bolt design with little to no modifications
- Passenger side only
- Powder coated in a black wrinkle finish
- Corbeau says its brackets include sliders
- Designed for Corbeau seats only
Passenger seat placement and checks
A passenger seat bracket carries the same loads as the driver side, so the same checks apply. Confirm the bracket is on the passenger side before installing it, since the two brackets are separate parts and mirror each other. Look at the mounting holes, bolt threads and bracket welds, and make sure the seat base sits flat before the bolts are fully tightened.
Sliders on a passenger seat are often used less than the driver’s, which can hide wear until the seat is adjusted. Work the slider through its full travel from time to time and check that both lock pins engage. A matched pair of driver and passenger brackets keeps the seats level and the sliders in step, so replace both together if one shows wear.
- Confirm side before installation
- Check both lock pins through full travel
- Replace brackets as a matched pair
Specifications
| Brand | Corbeau |
|---|---|
| Part number | CBUE2227 |
| Side | Passenger side only |
| Fitment type | Direct fit |
| Type | Seat bracket |
| Slider system | Double locking sliders with connecting bar |
| Finish | Powder coated, black wrinkle |
Vehicle fitment
The bracket is a direct fit for the 2007–2021 Toyota Tundra in the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail trims.
Toyota Tundra models from 2022 onward are outside the listed years, and the driver side bracket (CBUE2226) is a separate part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a direct bolt-on bracket, so Corbeau describes mounting as requiring little to no modifications to the truck. Pair it with a Corbeau seat, since these brackets are not designed for other seat brands.
What’s included
Lay out every part and compare it with the installation steps before you start.
Not included: the Corbeau seat, since this bracket is made to mount one.









