Overview
The Corbeau Mitsubishi double slider seat bracket, part number CBUE1166, fits the 1997–2000 Mitsubishi Montero and Montero Sport. It is a direct bolt bracket for mounting a Corbeau seat, with sliders that move the seat forward and back.
Corbeau has been making seats for motorsport use for 50 years, and its seats are used on street, track and off-road driving. The bracket is powder coated in a black wrinkle finish and includes single locking sliders as standard. The double locking slider suits high-stress driving.
Key features
- Direct bolt design with little to no modifications
- Powder coated in a black wrinkle finish
- Single locking slider: pull the side handle to slide the seat forward or back
- Double locking slider: a bar joins the two sliders, and you pull up on it to adjust the seat
- Double locking slider recommended for high-stress driving
- Fits 1997–2000 Mitsubishi Montero and Montero Sport models
Slider types and seat setup
Slider type affects how the seat is adjusted day to day. A single locking slider is operated from the side, which is simple and quick. A double slider joins two tracks with a bar, so the seat stays level as it moves, and the pull-up action gives more control over the lock. Drivers who make hard turns or spend long hours at the wheel often prefer the double design for its steadier feel.
Whichever type is fitted, check the locking pins and tracks regularly. Look for grit in the track, bent bars and any play when the seat is pushed side to side. The seat and bracket should move together and lock solidly. Because this is a direct bolt design, the main job before use is confirming the mounting holes line up with the floor and that every fastener is tightened fully.
- Keep the slider tracks clean
- Replace bent or worn locking pins
- Test both slider locks before every trip
Specifications
| Brand | Corbeau |
|---|---|
| Part number | CBUE1166 |
| Type | Seat bracket with double slider |
| Finish | Black wrinkle powder coat |
| Slider | Single and double locking sliders |
| Installation | Direct bolt with little to no modifications |
| Vehicle fitment | 1997–2000 Mitsubishi Montero; 1997–2000 Mitsubishi Montero Sport |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 1997–2000 Mitsubishi Montero in the Base, LS and SR trims, and the 1997–2000 Mitsubishi Montero Sport in the ES, LS, Limited and XLS trims. Those are the only years and models shown for this bracket.
Montero years outside 1997–2000 and other Mitsubishi models are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket is a direct bolt design, so check that its mounting holes line up with your seat and vehicle floor before tightening anything. Confirm the hardware matches your seat before starting, and test the slider locks before driving.
What’s included
The bracket, with single and double locking sliders. Check the package contents against your installation before starting.
Not included: the Corbeau seat, which is needed to complete the setup.









