Overview
The Smittybilt 8017N Standard Rear Seat is a stationary low back seat in spice color for the rear of a vehicle. Its steel tubular frame is covered in tailored pleating, and the thick padded cushions are built for comfort on longer rides.
The seat mounts to the brackets that come with it. Smittybilt says installation needs only minimal drilling. The product photo is an illustration only, so check the seat’s dimensions against your vehicle.
Key features
- Steel tubular frame covered in tailored pleating
- Thick padded cushions
- Stationary low back seat type
- Mounting brackets included, with minimal drilling required
Adding a rear seat safely
A rear seat adds passenger room, but it also changes how loads sit in the cabin. Seats that bolt to the floor or to brackets carry real force in a collision, so the mounting hardware and the surface it fastens to matter as much as the seat itself. Inspect the bolts and bracket welds after installation and periodically thereafter.
Upholstery and frames wear differently in a vehicle that sees trail use. Dust, sand and water can work into the stitching and the padding, so vacuum the seat regularly and let it dry fully after wet trips. A steel frame resists bending well but can rust at bare spots, so touch up scratches. Keep seat belts routed clear of the pleating and the frame edges.
- Recheck mounting bolts after the first drive
- Vacuum seams to remove grit
- Touch up bare steel to prevent rust
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 8017N |
| UPC | 631410091427 |
| Color | Spice |
| Seat location | Rear |
| Seat type | Stationary low back |
| Frame | Steel tubular |
| Mounting | Brackets included, minimal drilling required |
Vehicle fitment
Confirm the seat mounting points and location against your vehicle before ordering.
Installation notes
The seat bolts to the included brackets, and only minimal drilling is needed.
What’s included
The seat, with mounting brackets and hardware.












