Overview
The Corbeau D1027 is a slider seat bracket, part number CBUD1027, made for fitting a Corbeau seat. Its title refers to Ford, though no Ford years or chassis codes are tied to it, so the Ford fit is unconfirmed.
A seat bracket links the seat to the vehicle, and a poor match causes problems during installation and afterward. This bracket is made only for Corbeau seats, not for other brands. Its slider lets the occupant adjust seat position after mounting, with forward and backward travel on the bracket.
Key features
- Slider for seat position adjustment
- Made for Corbeau seats only
- Fitment field reads universal fit; no vehicle years given
- Bracket designed for aftermarket seat mounting
Seat bracket fit checks
Before fitting a slider bracket, verify that the seat frame and floor mounts match the bracket’s mounting layout. A seat made for one bracket family may sit misaligned on another, leaving the slider rails bowed or the bolt holes off line. Dry-fit the assembly before tightening anything.
Sliders need clearance for full travel. Check that the seat can slide forward and back without hitting the dash, the center console, or any wiring routed under the seat. Lock each stop and try the seat under load to confirm the mechanism holds.
Inspect the rails and locking mechanism periodically. Look for grit in the track, bent rail edges, or a lock that does not engage fully. Clean and lubricate moving parts using a lubricant suited to metal sliders.
- Dry-fit before tightening any bolts
- Check full travel against dash and console
- Inspect rails for bends and grit
- Confirm the lock engages at each stop
Specifications
| Brand | Corbeau |
|---|---|
| Part number | CBUD1027 |
| Type | Seat bracket with slider |
| Seat compatibility | Corbeau seats |
| Fitment | Universal fit |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Only the bracket is included, with no hardware.
Not included: the seat, which is needed to complete the setup.








