Overview
The Rough Country inner fender trim panel, part 10002, is a laser-cut, powder coated panel for trimming the inner fender of the 2014–2018 Chevrolet Silverado 1500 and GMC Sierra 1500. It is made for lifted trucks running wider tire and wheel sizes, and it can help reduce tire rub.
The panels reuse the factory GM corner guard, so the trimmed inner fender keeps a factory look while gaining clearance. The laser-cut lines guide the trimming step.
Key features
- Laser-cut panels for the trimming step
- Adds 5/8in of clearance per fender
- Reuses the factory GM corner guard
- Powder coated finish
- Allows wider tire and wheel sizes
Clearance and trimming tips
Inner fender trimming is the part of this job that takes the most care. Once metal is removed, the cut edges are bare and can rust unless they are sealed. A light coat of touch-up paint or a compatible sealer on the cut edges helps keep the area protected, and filing away burrs keeps wiring and hoses from catching.
Before cutting, turn the steering from lock to lock with the wheels and tires installed to see where rub occurs. Trim in small passes rather than one large cut, and check fit after each pass. Wheel offset, tire width and suspension height all change where contact happens, so set those first where possible.
- Route brake lines, fuel lines and wiring clear of cut edges
- Deburr cut edges before refitting the wheel
- Recheck clearance after the first drive on rough ground
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 10002 |
| Construction | Laser-cut panels |
| Finish | Powder coated |
| Clearance gained | 5/8in per fender |
| Factory part reused | GM corner guard |
| Fitment type | Direct fit |
Vehicle fitment
Rough Country lists these trim panels for the 2014–2018 Chevrolet Silverado 1500 in Custom, High Country, LS, LT, LTZ, SSV and WT trims, and for the 2014–2018 GMC Sierra 1500 in Base, Denali, SLE and SLT trims.
Silverado and Sierra HD models, and model years outside 2014–2018, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Trimming is part of the fit, so cutting at the inner fender is expected. Mark your cut lines carefully before cutting sheet metal.
What’s included
Check the package contents for the number of panels and any hardware before starting.









