Overview
The Westin 72-20102 is a Wade Slim Design top wind deflector for 2007–2016 and 2018 Jeep Wrangler (JK) models. The slim design is meant to reduce wind, noise, heat and glare, and it attaches with 3M tape-on application.
It fits the JK trims Rubicon, Sahara, Sport, Sport S and X, plus the 70th and 75th Anniversary editions and the Unlimited versions of those trims.
Key features
- Quality hi-impact material
- Precise measurements for an accurate fit
- Designed to cut wind, noise, heat and glare.
- 3M tape-on application
Caring for a tape-mounted deflector
A top wind deflector sits in the airflow and takes sun, heat and washing every day, so its adhesive bond needs regular attention. Clean the mounting area with a mild cleaner before pressing the deflector in place, and avoid oils or wax residue that can weaken the tape. Let the bond set before driving at highway speeds.
Once mounted, check the edges every few weeks for lifting, especially after car washes or high pressure spray. Gently press any loose section back down and clean the surface again if needed. Removing a tape-mounted piece usually means warming the adhesive and working slowly with a plastic tool to avoid scratching the paint.
- Clean the surface before mounting
- Avoid wax and oil near the tape
- Check edges after car washes
- Use a plastic tool when removing
Specifications
| Brand | Westin |
|---|---|
| Part number | 72-20102 |
| UPC | 707742020531 |
| Product line | Wade Slim Design |
| Type | Top wind deflector |
| Material | Hi-impact material |
| Mounting | 3M tape-on |
Vehicle fitment
It fits 2007–2016 and 2018 Jeep Wrangler (JK) models in the trims named above.
2017 is outside the year coverage, and Wrangler (JL) models are outside this fit. Verify the year, model and trim against your vehicle before buying.
Installation notes
The 3M tape-on application needs a clean, dry mounting surface and careful placement, because the tape bonds on contact. Check the placement before pressing it down.
What’s included
Check the package contents, including any hardware, against your installation before starting.












