Overview
The Westin HDX Rear Bumper, part number 58-271305, is a textured black, 1-piece welded steel rear bumper for the 2014–2019 Toyota Tundra. It is made from 7 gauge steel with seamless welded bends and includes two flush mount LED lights, license plate illumination lights and mounting brackets.
Westin says HDX rear bumpers are application specific and are designed, engineered, tested and manufactured in the USA. The ends carry a laser-cut HDX logo, and the shackle mounts are 1 inch thick.
Key features
- 7 gauge steel, 1-piece fully welded construction
- Seamless welded bends and a textured black finish
- 1 inch thick HD shackle mounts
- Two FM6 LED flush mount lights included
- License plate illumination lights included
- Laser-cut HDX logo on the ends
- Mounting brackets included
Rear bumper trade-offs
A rear bumper does more than protect the tail end. It can carry a tire, a hitch or recovery gear, and it sets the approach and departure geometry for the back of the truck. Heavy steel adds weight behind the rear axle, which affects traction and suspension travel, so consider how often you will carry or tow loads.
Rear lights and license plate mounts sit on the bumper, so check wiring when you install flush lights or plate lights. Route the harness through protected paths, use weatherproof connectors and keep the ground connection clean. Sensors, when fitted, need their own wiring and a mounting position checked against the bumper design.
- Confirm plate light and LED wiring before final mounting
- Inspect welds and shackle mounts after rough trail use
- Clean and touch up powder coat chips to slow rust
Specifications
| Brand | Westin |
|---|---|
| Part number | 58-271305 |
| UPC | 707742067222 |
| Product type | HDX rear bumper |
| Position | Rear |
| Material | 7 gauge steel, 1-piece fully welded |
| Finish | Textured black powder coat |
| Shackle mounts | 1 inch thick, heavy-duty (D-ring mount included) |
| Lights | Two FM6 LED flush mounts and license plate illumination lights |
| Receiver hitch | No |
| Tire carrier | No |
| Fit type | Direct fit |
| Made in | USA |
Vehicle fitment
The HDX rear bumper 58-271305 is a direct fit for the 2014–2019 Toyota Tundra, covering the SR, SR5, Limited, Platinum, 1794 Edition and TRD Pro trims.
Tundras built before 2014 or after 2019 are outside this fit. Back-up sensor provision varies between HDX rear bumpers, so confirm which version you need before ordering.
What’s included
The HDX rear bumper, mounting brackets, two FM6 LED flush mount lights and license plate illumination lights.









