Overview
The Warrior Greaseable Shackles 13130 are a pair of hammertone gray greaseable leaf spring shackles that give 2 inch of front lift. They fit the 1976–1983 Jeep CJ5 and the 1976–1986 Jeep CJ7.
Warrior says its shackle kits come complete with lock nuts, polyurethane bushings, drilled sleeves where needed, and hardened bolts with greaseable fittings. The kits are meant to clear oversize tires with an immediate lift, and Warrior says its shackles allow a lift from 1/2 inch to 2-1/2 inch depending on the application. Kits come in pairs.
Shackles connect the leaf spring to the frame and set part of the vehicle’s ride height. The Warrior 13130 is a greaseable design with polyurethane bushings and hardened bolts with greaseable fittings, intended to clear oversize tires with an immediate lift.
The kits include all of the hardware needed for installation and are built along the same lines as the brand’s leaf spring shackle kits. Kits are sold in pairs in hammertone gray or gold zinc finishes. This part number is the gray hammertone version with 2 inch of front lift. The catalog number is W/I13130.
Key features
- Greaseable leaf spring shackles
- Front 2 inch of lift for this part number
- Includes lock nuts and polyurethane bushings
- Drilled sleeves where needed
- Hardened bolts with greaseable fittings
- Gray hammertone finish
- Kit comes in a pair
Before you install shackles
Leaf spring shackles give the spring ends room to move as the axle travels, so they are a major part of how the suspension flexes. Replacing worn shackles with greaseable units can reduce squeaks and binding, and it puts fresh bushings where the old ones have hardened or cracked. Look at the old bushings, the bolt holes and the spring eyes before you start, and note any play in the joints.
A lift change affects more than height. Changing the front ride height can alter caster, driveline angles and steering geometry, so an alignment check after installation is a good habit. Because the shackles connect the spring to the frame, the hardware should be tight and the greased joints should move freely. Grease the fittings on a regular schedule and check the bolts after the first few drives.
Specifications
| Brand | Warrior |
|---|---|
| Part number | 13130 |
| Catalog number | W/I13130 |
| UPC | 63414613130 |
| Part type | Greaseable shackle kit |
| Lift | Front 2 inch |
| Finish | Gray hammertone |
| Quantity | Kit comes in a pair |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Warrior 13130 covers the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade) and the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade).
The list does not include the Jeep Scrambler or CJ7 model years after 1986. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shackles hold the leaf spring ends to the frame, so a secure install matters. Grease the fittings after fitting, torque the bolts to specification, and recheck after the first few drives. The ride height may change slightly, so look at the alignment.
What’s included
The kit contains lock nuts, polyurethane bushings, drilled sleeves where needed and hardened bolts with greaseable fittings.
















