Overview
The Warrior 30920 is a 2-inch economy leaf spring lift for the Jeep Cherokee (XJ) from 1984 to 2001. It uses 2-inch lift shackles and 2-inch coil spring spacers, with a lift height range of 0 to 2.25 inches. Warrior offers this traditional leaf spring suspension system as a lower-cost option, with individual components available if you want to build the system in parts.
Key features
- 2-inch lift shackles for the rear leaf springs
- 2-inch coil spring spacers
- Hi-Impact polyurethane bushings
- Complete mounting hardware included for installation
Shackles and spacer wear
Lift shackles pivot at the rear leaf springs, so the polyurethane bushings and pins take regular movement. Check these parts at routine service for cracks, looseness or squeaking over bumps. Replacing a worn bushing is a small job compared with the cost of a bent shackle or a damaged spring.
Coil spacers carry load between the spring and the body, so check that they are seated and undamaged during service. Brake lines may need inspection after a lift, since hose length changes with ride height. A steady inspection habit keeps the lift working as designed.
- Inspect shackle pivots at each oil change
- Check coil spacer seating and condition
- Look for brake hose strain after the lift
- Retighten hardware after early drives
Specifications
| Brand | Warrior |
|---|---|
| Part number | W/I30920 |
| Suspension type | Spacer |
| Rear lift method | Spacers and lift shackles |
| Lift height range | 0 to 2.25 inches |
| Rear lift component | Spacer |
| Front shocks | None |
| Shocks | Not included |
| Bushing material | Hi-Impact polyurethane |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ) in Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims. The XJ generation is the only Cherokee covered.
The kit is for the XJ Cherokee, not the Grand Cherokee or Liberty. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lift works through shackles and coil spacers, the installer should check the shock length and brake line routing after the lift, as the stock shocks are not in the kit.
What’s included
- 2-inch lift shackles
- 2-inch coil spring spacers
- Mounting brackets and hardware
Not included: shocks.




