Overview
The Warrior 1 Inch Lift Shackle, part number 147, is a rear spring shackle for the 1984–2001 Jeep Cherokee (XJ). It provides a 1 inch lift and is MIG-welded and jig-built in hammertone gray.
A lift shackle raises the rear of the body by changing the angle at which the leaf spring meets the frame. The 147 kit comes with bushings and sleeves only, so mounting hardware must be supplied separately.
Key features
- Rear position, 1 inch of lift
- MIG-welded and jig-built construction
- Hammertone gray finish
- Bushings and sleeves included
Things to check before fitting
A rear lift shackle works at the leaf spring pivot, so the rear axle and driveline both see a new angle. Driveshaft joints should be checked for play and binding once the kit is in. The rear brake lines may need a look too, since a raised rear end can change how far the lines flex.
Good preparation makes the job smoother. Because the kit ships without mounting hardware, gather bolts, nuts and washers that match the spring eye and frame holes before starting. Keep the old parts until the new ones are in and checked, so the spring position can be compared during the job.
- Inspect driveshaft joints for play after fitting
- Check rear brake lines for stretch
- Gather matching bolts, nuts and washers first
- Recheck the alignment after the first drives
Specifications
| Brand | Warrior |
|---|---|
| Part number | 147 |
| UPC | 63414600147 |
| Position | Rear |
| Lift | 1 inch |
| Finish | Hammertone gray |
| Construction | MIG-welded, jig-built |
| Included parts | Bushings and sleeves |
| Hardware | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ) in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
The Grand Cherokee (ZJ and WJ) and Wrangler models are outside its fit range. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Because hardware is not included, confirm the bolt sizes and mounting hardware you need before starting. A 1 inch rear lift changes driveline angles, so have the alignment and driveline checked afterward.
What’s included
A rear shackle with bushings and sleeves, in hammertone gray.
Not included: Mounting hardware is not included.









