Overview
The Warrior 149 is a leaf spring shackle kit from Warrior, part number 149, built for the 1987–1995 Jeep Wrangler (YJ). Spring shackles are the links that hang a leaf spring from the frame, so a shackle kit changes how the spring sits and therefore the height of that end of the vehicle.
Warrior says each spring shackle is MIG-welded and jig-built, lifts one end of the vehicle from 1/2 inch up to 2-1/2 inch depending on the application, and comes complete with the mounting hardware needed for installation. Kits come in pairs. The product highlights list 1/2 inch of front lift.
Key features
- MIG-welded and jig-built spring shackles
- Complete mounting hardware included for installation
- Lift range of 1/2 inch up to 2-1/2 inch, depending on application
- Front lift of 1/2 inch listed in the product highlights
- Kits come in pairs
- Choice of hammertone gray or gold zinc finish
Shackle geometry and alignment
Spring shackles set how the leaf spring hangs, so any change to them affects ride height, axle position and driveline angles. After the lift is fitted, have the alignment and driveline angles checked, since steering and tire wear can change when the geometry moves. Watch tire wear patterns over the first few trips.
Front shackles affect steering geometry more than rear ones do, so inspect the tie rod ends, drag link and track bar for play after installation. Worn steering parts can make a lifted front feel loose on the road. When choosing a lift height, consider the other parts affected, such as shocks and brake lines, and whether they need extension or replacement.
- Check the alignment after installation
- Inspect tie rod ends and track bar for play
- Review shock length for the new lift height
Specifications
| Brand | Warrior |
|---|---|
| Part number | 149 |
| UPC | 63414600149 |
| Construction | MIG-welded, jig-built spring shackles |
| Lift height | 1/2 inch up to 2-1/2 inch, depending on application |
| Front lift | 1/2 inch |
| Finish | Hammertone gray or gold zinc |
| Quantity | Pair |
| Hardware | Mounting hardware included |
Vehicle fitment
Covered trims: Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport. Applies to the 1987–1995 Jeep Wrangler (YJ).
The list does not cover the 1997–2006 Wrangler (TJ), the 2004–2006 Wrangler (LJ) or the 2007–2018 Wrangler (JK). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the shackles change suspension geometry, have the alignment and driveline angles checked after the lift is installed. Use the included hardware as supplied. Support the vehicle on stands before removing the old shackles.









