Overview
The Warrior 13212 is a greaseable 1-1/2 inch lift shackle kit, part number 13212, for the 1976–1983 Jeep CJ5 and the 1976–1986 Jeep CJ7. It is designed for the front of the vehicle.
The kit combines Warrior’s 1.5 inch lift shackles with a set of greaseable bolts and sleeves. Sold in pairs, each pair lifts one end of the Jeep, and the kit is gold zinc plated.
Key features
- Combines 1.5 inch lift shackles with greaseable bolts and sleeves
- Each pair lifts one end of the Jeep
- Gold zinc plated
- Front position
- Sold as a pair
Front lift and steering geometry
Front lift shackles change the angle of the front leaf springs, which affects caster and the position of the axle relative to the body. These changes can alter steering feel, tire wear and the strain on steering components. A front lift is often paired with checks on the steering linkage, the track bar and the driveline, since these parts react to a raised front end.
The greaseable bolts and sleeves in this kit are designed to be serviced over time, so grease the fittings during routine maintenance and keep the pivots clean. Recheck the bolts after the first few drives and again after rough use. Watch for changes in steering wander or vibration, and get an alignment check after installing front lift components so the tires wear evenly.
Specifications
| Brand | Warrior |
|---|---|
| Part number | 13212 |
| UPC | 63414613212 |
| Lift | 1.5 inch |
| Position | Front |
| Finish | Gold zinc plated |
| Bolts and sleeves | Greaseable |
| Quantity | Pair |
Vehicle fitment
The manufacturer fitment list covers the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade) and the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade).
CJ5 years outside 1976–1983 and CJ7 years outside 1976–1986 are not on this list, nor are Wrangler models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The greaseable bolts and sleeves are part of this kit. After installation, check the ride height at the front, since each pair lifts one end of the Jeep.
Use stands rather than a jack alone when working under the front end.
What’s included
A pair of 1.5 inch lift shackles with greaseable bolts and sleeves.









