Overview
The Warn Premium Manual Hub Kit 9072 is a chrome manual locking hub kit for 19 spline outer axles with 6 bolt flange style mounting. Warn labels the fitment direct fit, and no specific vehicles are named.
Warn presents the Premium Hub as an all-metal, no-compromise hub, with a Zink Aluminum Alloy dial for years of dependable use. The dial must be turned a full 9/10ths of a turn so the inner drive gear engages the clutch ring, and Warn fits a thick internal wave spring and heavy dial detents to hold it engaged.
Warn gives every hub a limited lifetime warranty. The 9072 is the 19 spline version in the range, so it is the one to look at when an axle uses 19 spline outer shafts.
A vehicle with full time 4WD must be converted at the transfer case before manual hubs can be used.
Key features
- Manual locking hub kit for 19 spline outer axles
- 6 bolt flange style mounting
- All-metal construction
- Zink Aluminum Alloy dial
- Dial turns a full 9/10ths of a turn
- Thick internal wave spring and heavy dial detents
- Chrome finish
- Limited lifetime warranty from Warn
Using manual hubs day to day
Manual locking hubs are simple to operate, but they reward regular care. Turn the dial the full distance each time, and listen for a clean engagement. If the dial feels loose or does not turn fully, stop and check the hub before driving further, since a partly engaged hub can slip under load.
Mud, sand and water are the main enemies of a hub. Rinse the hub after muddy trips, and keep the dial area free of grit so it turns smoothly. Lubricate the moving parts at the intervals suited to your use, and inspect the seal for leaks at each service.
- Engage the hubs before the drive, not after a slip
- Check the dial for smooth rotation after washing
- Keep the seal clean and free of trail grime
Specifications
| Brand | Warn |
|---|---|
| Part number | 9072 |
| UPC | 12748090724 |
| Part type | Premium manual locking hub kit |
| Spline count | 19 splines (outer axle) |
| Mounting | 6 bolt flange style |
| Construction | All metal |
| Dial | Zink Aluminum Alloy |
| Knob material | Metal |
| Finish | Chrome |
| Warranty | Limited lifetime warranty (Warn) |
Vehicle fitment
It is a direct fit for 19 spline outer axles with 6 bolt flange style mounting. Confirm your axle’s spline count and flange style before ordering.
Check your axle’s spline count and the 6 bolt flange before ordering. Warn gives no vehicle list for the 9072, so check its specifications for your axle.
Installation notes
Vehicles with full time 4WD will need a transfer case conversion before manual locking hubs can be used. After that, the driver locks and unlocks the hubs by hand with the dial.








