Overview
The Warn 35028 is a retaining ring for Warn Truck and Jeep winch repairs. It is identified by part number 35028 and UPC 12748350286. A retaining ring is a snap-in ring that holds a part in position inside an assembly.
It is a universal fit ring, but the winch model determines whether it is the correct ring.
Key features
- Retaining ring for Warn Truck and Jeep winch repair
- Brand Warn, part number 35028
- UPC 12748350286
- Universal Fit, matched by winch model
Snap rings and wear
A retaining ring is a small part, but it holds gears, bearings or shafts in place, so a loose or distorted ring can let the assembly shift during a pull. Rings that have been removed often lose their tension and should be checked before reuse. Inspect the groove the ring sits in for burrs or wear as well.
Snap rings are usually replaced whenever they are removed, since bending them to remove often weakens the spring action. Use the correct ring pliers so the ring does not slip or fly loose during removal. Keep the parts laid out in order, and check each one against its position before reassembly to avoid mixing up similar components. Clean the groove and surrounding parts before fitting the new ring.
Specifications
| Brand | Warn |
|---|---|
| Part number | 35028 |
| UPC | 12748350286 |
| Component | Retaining ring |
Vehicle fitment
No vehicle is named for this ring. Match it to the winch model, not to a vehicle, before choosing it.
Use the winch’s model number and battery voltage to confirm the match.
Installation notes
Upright spur gear models (M8274) carry the serial number on the top of the winch housing. Planetary models carry it on the gear end housing, so locate it before comparing parts.
What’s included
Only the retaining ring is described.
Not included: The winch and its gears are not included.








