Overview
The WARN VR10 GEN II is an electric winch, part number 96810, with a 10,000 lb rated line pull, a 12V motor and 80 ft. of 3/8 wire cable. It has updated styling and upgraded performance.
WARN points to the 10,000 lb capacity for Jeep JKU, half-ton pickups and many SUV applications. That is an application note rather than a fitment list, so mounting and clearance on your own vehicle still decide the match.
Key features
- Convertible control pack for upright or low-profile mounting
- Waterproof Albright contactor for winch control
- One-piece tie plate in place of multiple tie bars
- Cone brake that holds the full-rated load.
- 10,000 lb rated line pull with 80 ft. of 3/8 wire cable
Mounting layout and control packs
Control pack placement affects how the winch is wired and how the operator reaches it. An upright mount keeps the pack easy to see and service, while a low-profile mount suits a tight engine bay or a bumper with limited room. Choose the layout before the winch is bolted on, because moving the pack later means re-running cable and checking the seals.
Waterproof contactors and tie plates make the install cleaner and help the system resist water and road grime. Inspect seals and connectors after deep water crossings, and clear any mud from the cone brake area. Wire cable should be checked for kinks and fraying, and the hawse fairlead kept free of debris. A bumper or winch plate matched to the winch is usually replaced together with the winch.
Specifications
| Brand | Warn |
|---|---|
| Part number | 96810 |
| Model | VR10 GEN II |
| Rated line pull | 10000 lbs |
| Motor | 12V |
| Gear ratio | 261:1 |
| Type of winch | Electric |
| Remote control | Remote switch, 12 ft. lead |
| Wire rope | 80 ft. of 3/8 wire cable |
| Fairlead | Hawse |
| UPC | 12748968108 |
Vehicle fitment
The universal fit designation names no model years, so the mount must be matched to your own vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Choose upright or low-profile control pack mounting before fitting the winch, since the pack supports both.
What’s included
The winch with its convertible control pack, a remote switch with a 12 ft. lead and 80 ft. of 3/8 wire cable.
Not included: a bumper or winch plate.









