Overview
The Warn 62672 is a premium manual locking hub set in chrome, with 35 splines and a metal knob. Warn created these hubs for off-roaders who needed a special set for aftermarket Dana 60 axle shafts, and they are made for use with aftermarket 35-spline outer shafts.
No vehicle model, year or trim is named. Fit depends on the shaft and its spline count rather than on a vehicle name, so confirm your axle shafts have 35 splines before ordering.
Key features
- Premium manual hub design
- 35-spline connection for aftermarket outer shafts
- Chrome finish with metal knob
- Universal Fit label
Matching hubs to your axle
Chrome manual locking hubs are mainly a matter of matching the spline count and the shaft they fit. The knob engages the locking mechanism, and the body must sit cleanly on the axle shaft with no play. Before buying, measure your existing shaft and compare its spline count, since a hub that looks right can still fail to engage the shaft. Keep the seating surfaces clean and free of grit so the fit stays snug.
Care is simple. Wipe the chrome with a soft cloth and mild soap, then dry it fully to avoid water spots. Inspect the knob for cracks or looseness and check that it turns freely in both positions. Lubricate the moving parts as your service procedure requires.
Specifications
| Brand | Warn |
|---|---|
| Part number | 62672 |
| UPC | 1274862672 |
| Product type | Premium manual locking hubs |
| Spline count | 35 splines |
| Knob material | Metal |
| Finish | Chrome |
| Intended use | Custom Dana 60 axles with aftermarket 35-spline outer shafts |
| Fitment label | Universal Fit |
Vehicle fitment
Universal Fit is the only fit statement, and the hubs are tied to aftermarket Dana 60 axle shafts with 35-spline outer shafts rather than to a vehicle. No vehicle years, models or trims are given.
Hubs with a different spline count will not match 35-spline shafts, so fit depends on the shaft, not only the Dana 60 name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the 35-spline count to your outer shafts before fitting. No installation steps are described.
What’s included
Check the package contents against your installation before starting, including the number of hubs and any hardware you need.












