Overview
The Vision X Lighting 4007246 is a 2 inch Solstice Spot Solo LED pod, a compact off-road lamp built around a 10 watt LED. It is universal fit, so it is not tied to a year, make or model; where it mounts depends on the bracket or channel hardware you choose.
Each pod has a 2 inch by 2 inch square housing rated at 900 lumens. The four-sided channel design lets you interlink it with other Solstice Solo pods or with hardware for flat, tube or helmet mounts, which Vision X describes as a modular light that can be built into many shapes and lengths. The Solo name indicates a single pod, and the product is the Solo s1100 from the Solstice Series.
Key features
- 10 watt Vision X LED technology producing 900 lumens from a 2 inch by 2 inch housing.
- Four-sided channel design for interlinking with other Solstice Solo pods or flat, tube and helmet mounts.
- The die-cast aluminum housing provides durability and heat dissipation.
- The housing is sealed to IP68, protecting it from dust and submersion up to 3 meters.
- Unbreakable polycarbonate lenses held by a 6061 aluminum face plate that doubles as a radiant heat sink to help clear snow and ice.
- Electronic drivers with a 50,000 hour life span.
- Variable 9 – 50 Volt DC input drawing 0.83 amps.
- Vibration tested at 15.6Grms for high impact conditions.
Mounting setup planning
Mounting a Solstice Solo pod starts with deciding where the light will work best. Because the pod is universal fit, the bracket, channel hardware and mounting surface determine placement more than any vehicle-specific factor. Measure the space on a bull bar, roof rack or cage, and leave room for the power wiring to reach the channel without rubbing against moving parts.
Pods that link together share power and mounting geometry, so plan the full layout before drilling. A single pod works well for a focused beam on a trail vehicle, while several pods on one set of hardware spread light across a wider area. Keep the lens clear of mud and snow, and check the channel ends for debris before reattaching hardware.
- Confirm clearance for the pod face and lens
- Route wiring away from sharp edges and hot exhaust parts
- Re-tighten hardware after the first few trail runs
Specifications
| Brand | Vision X Lighting |
|---|---|
| Part number | 4007246 |
| UPC | 837544007246 |
| Series | Solstice Solo, model s1100 |
| Housing size | 2 inch x 2 inch square |
| Light source | 10 watt LED |
| Output | 900 lumens |
| Input voltage | 9 – 50 Volt DC, variable |
| Current draw | 0.83 amps |
| Life span | 50,000 hours |
| Ingress protection | IP68, submersible up to 3 meters |
| Housing material | Die-cast aluminum |
| Lens | Polycarbonate |
| Face plate | 6061 aluminum |
| Vibration rating | 15.6Grms |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit and not vehicle-specific. Fit depends on the mounting bracket or hardware you use with the channels.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan the layout before mounting, because the channel on each side accepts other Solstice Solo pods or the hardware Vision X offers for flat, tube or helmet mounts. Power the pod through a fused relay, and check local rules on auxiliary driving lights before using them on public roads.
What’s included
Check the package contents against your installation before starting, and plan for mounting hardware for flat, tube or helmet mounts.
Not included: Plan to supply a wiring harness, relay and mounting bracket separately.








