Overview
Part number 9115153 is a 42 inch narrow beam light bar in the Low Profile Prime XP series. It is a universal fit design, and its height of 2.06 inch keeps the housing low.
The bar gives twice the light output of the 3 watt Low Profile Bar and uses Prime Drive Technology to manage heat in the LEDs. A bar this long needs a mounting spot that can hold its full 42 inch length, so plan the position first.
Key features
- 42 inch narrow beam bar
- 2.06 inch low profile height
- Twice the light output of the 3 watt Low Profile Bar
- Prime Drive Technology manages heat levels
- Universal fit
Mounting a long low-profile bar
A 42 inch bar puts a lot of leverage on its brackets, so plan for more than one attachment point. Choose a flat, solid surface that does not flex, and keep the bar clear of hood latches, hinges and the windshield’s sweep path. Dry-fit the bar before drilling so the position is confirmed.
Low-profile housings sit close to the surface, which can make them vulnerable to brush and rock contact on trails. Check the lens and housing after rough use, and clear mud from the vents. A narrow beam reaches farther down the trail, so aim it with that in mind for road or trail speed.
Routing matters for a bar this size. Run the cable along existing body lines, use grommets where it passes through metal, and fuse the feed close to the battery.
- Dry-fit before drilling
- Use multiple bracket points
- Fuse the feed near the battery
Specifications
| Brand | Vision X Lighting |
|---|---|
| Part number | 9115153 |
| UPC | 887009115153 |
| Series | Low Profile Prime XP |
| Length | 42 inch |
| Beam | Narrow |
| Height | 2.06 inch |
| Heat management | Prime Drive Technology |
Vehicle fitment
The bar is a universal fit design, so it is not tied to a model year. Its 42 inch length makes the mounting spot the main fit question.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan the bracket position and the wire route before drilling or clamping, and run the power through a fused circuit with a relay.
What’s included
Check the package contents against your installation before starting.
Not included: Plan brackets and wiring before installation, since the bar needs both to mount.









