Overview
The Vision X Lighting 9124421 is a 3.25 inch square off-road light, model XIL-OP110, from the Optimus Series Prime line. It is a 10-degree spot beam LED light with a 10 Watt LED and a black powder coated die-cast aluminum housing. It is a Universal Fit light, so it is not tied to a specific make, model or year.
The spot pattern throws light far ahead with little spread to the sides. It uses IRIS reflector technology and Prime Drive for enhanced reliability and output. It has a multi-volt 9-32V DC input and a mounting depth of 2 inch, and it weighs 1.25 pounds.
Key features
- Spot beam pattern for distance with little spread to the beam
- 10 Watt LED technology
- Proprietary IRIS reflector technology
- Prime Drive for enhanced reliability and output
- Black powder coated die-cast aluminum housing
- Multi-volt 9-32V DC input
- Mounting depth of 2 inch
Sizing a spot light
Spot lights are usually mounted where the beam can run straight down the trail, such as a bumper corner, a roof rack or a bar that sits above the windshield line. Mounting high reduces glare on nearby terrain, while mounting low tends to make the light more useful for close obstacles. Measure the space behind the mounting surface, since a deep housing needs clearance for the wiring and any bracket bolts.
Power and wiring deserve the same attention. A relay keeps current away from the switch and helps the light run steadily. Route the cable away from moving suspension parts and check that the fuse is sized for the connected load. After the first rough drive, look over the bracket bolts and the connector seal for loosening or moisture.
- Measure the mounting depth before choosing a bracket
- Use a relay to protect the switch
- Route cable clear of moving suspension parts
Specifications
| Brand | Vision X Lighting |
|---|---|
| Part number | 9124421 |
| UPC | 887009124421 |
| Model | XIL-OP110 |
| Series | Optimus Series Prime |
| Beam pattern | Spot, 10-degree |
| Light source | 10 Watt LED |
| Light size | 3.25 inch square |
| Input voltage | Multi-volt, 9-32V DC |
| Housing | Black powder coated die-cast aluminum |
| Mounting depth | 2 inch |
| Weight | 1.25 pounds |
Vehicle fitment
It is a Universal Fit light, so no specific vehicle applies. The 2 inch mounting depth and the available mounting surface are the main sizing checks before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire the light through a fuse and a relay, and check local rules on auxiliary lights before using it on public roads.
What’s included
Confirm the package contents match your installation plan before starting.
Not included: mounting hardware and wiring, to be planned separately before installing












