Overview
The Firestik Universal 3-Way Flag Mounting Bracket, part number SS-6F, is a mounting bracket from Firestik, which makes CB antennas, mounts and accessories. It is a three-way bracket for mounting flags. The KW wire-wound CB antennas and the Firestik mounts below are the setup this bracket is used with.
KW antennas work on autos, trucks, vans, motorcycles and ATVs in a single antenna setup when a metallic ground plane is available. They can also run in a dual co-phased setup on any vehicle, whatever the body material. Each antenna is top-loaded with a loading coil that is easy to reach for tuning.
Key features
- Three-way flag mounting bracket.
- A 3/8-24 threaded antenna base has a tapered contact point that works well with Firestik mounts.
- The tapered lug-nut effect moves stress away from the threads and reduces vibration-induced loosening in the mount
- Loading coil is easily accessible for precise SWR adjustments
- Glass fiber reinforced shaft and heavy insulated copper winding, which Firestik says prevent the oxidation and shorted windings often found on non-Firestik antennas
- Static reducing, water-tight sleeve with UV and pigment stabilizers
- Receives the NOAA emergency weather alert and national weather broadcasts on radios with those features
- Factory bench tested for resonant frequency and overall quality
Using a flag bracket safely
A flag bracket adds weight and wind load to the mount, so the mounting point needs to be secure. Choose a spot on the vehicle where the bracket does not block a door, a light or the antenna’s tuning area. Check the clamp and fasteners after the first drives and again after rough terrain.
Keep the flag and bracket clear of the antenna base so the whip can be adjusted and inspected. When the flag is removed, store it dry to prevent fading and mildew. If the bracket is used with a CB antenna, retune SWR once the bracket and flag are in their final positions.
- Keep the bracket clear of door and light movement
- Recheck fasteners after rough trips
- Retune after the flag is in its final position
Specifications
| Brand | Firestik |
|---|---|
| Part number | SS-6F |
| UPC | 716414201017 |
| Product type | Universal 3-way flag mounting bracket |
| KW antenna base thread (per copy) | 3/8-24 |
| KW antenna shaft (per copy) | Glass fiber reinforced |
| Warranty (per copy) | 5 Year Limited Warranty |
Vehicle fitment
This bracket has no vehicle fitment, and the title identifies it as universal. The KW antenna details above do not apply to this bracket. Check the mounting and flag arrangement against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tune every antenna after it is installed on the vehicle, since transmitting antennas are not plug-and-play devices. Tuning is done in the final mounting location, so plan to adjust SWR once the mount is in place.
What’s included
Check the package contents against your installation before starting.
Not included: Use Firestik’s 18-foot Fire-Flex coaxial cable, part DASTS-8X18, with KW antennas. An antenna and that cable are not included with this bracket.









