Overview
The Firestik KW Series CB Antenna in the 2-foot (2′) black whip is a wire-wound, 5/8 wave CB antenna rated at 100 watts. It suits autos, trucks, vans, motorcycles and ATVs, and it is built for drivers who want a short, dependable CB whip with a solid fiberglass core.
The KW design is the original Firestik wire-wound CB antenna and has been in use since 1975. A single-antenna setup needs a metallic ground plane, while a dual co-phased setup works on a vehicle made from any type of material. The top-loaded design also receives NOAA emergency weather alerts and national weather broadcasts on compatible radios.
Key features
- Wire-wound 5/8 wave whip, rated at 100 watts
- Glass fiber reinforced shaft blended for a balance of flexibility and ruggedness
- Heavy insulated copper wire winding that resists oxidation and shorted windings
- Loading coil is easy to reach for precise SWR adjustments
- Tapered 3/8″-24 threaded base; the tapered contact reduces vibration-induced loosening in the mount
- Static reducing, water-tight sleeve with UV and pigment stabilizers
- Factory bench tested for resonant frequency and overall quality
Short whip trade-offs
A short whip is easier to fit in tight spots, such as low roof lines or rear mounts, but the antenna’s height above the ground plane still shapes how it transmits. Placing it on the vehicle’s metal roof or a metal mount gives a stronger ground reference than plastic body panels. Consider the spot before drilling anything.
A shorter antenna is less exposed to branches and low clearance, which helps on trails. It also makes the radio and cable matter more, so use good coax and secure connectors. If reception seems weak, check the base, cable and tuning before blaming the antenna.
- Plan the mount location before drilling
- Check overhead clearance for garages and trails
- Secure the coax along the body
Specifications
| Brand | Firestik |
|---|---|
| Product | KW Series CB Antenna, 2-foot black whip |
| Length | 2 ft (2′) |
| Color | Black |
| Power rating | 100 watts |
| Wave design | 5/8 wave |
| Core | Solid fiberglass |
| Base thread | 3/8″-24 |
| UPC | 716414100006 |
| Warranty | 5 Year Limited Warranty |
Vehicle fitment
This antenna is not vehicle-specific. It is a universal CB whip for autos, trucks, vans, motorcycles and ATVs, so no year, model or trim applies. Mounting depends on the vehicle: a single-antenna setup needs a metallic ground plane, while a dual co-phased setup works on any material.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tune the antenna once it is mounted on the vehicle. The loading coil is the SWR adjustment point, and it should be set in the final mounting location because CB antennas are not plug-and-play. Firestik recommends its 18-foot Fire-Flex coaxial cable #DASTS-8X18 for peak performance.
What’s included
Only the antenna is included. Mounting hardware and coaxial cable are not part of the package.
Not included: the 18-foot Fire-Flex coaxial cable #DASTS-8X18 that Firestik recommends.









