Overview
The 22826KN is a lift kit with SX8000 shocks for the 1997 Ford F-250, including the Base, Lariat, XL and XLT trims. Its rear lift figures are 2.5 inch and 1.5 inch, and it uses an add-a-leaf design with a 2 inch rear add-a-leaf.
The kit includes an axle pivot bracket made to mate with a bracket that has four mounting holes, a U-bolt and center pins. The SX8000 shocks are included with the kit.
Tuff Country says its lift kits are engineered for quality and simple installation, and each one is backed by a limited lifetime warranty.
Key features
- SX8000 shocks included
- Add-a-leaf rear lift design
- 2 inch rear add-a-leaf
- Axle pivot bracket
- U-bolt and center pins included
- Bracket compatibility with a four-hole mounting pattern
Add-a-leaf rear lifts
An add-a-leaf adds a leaf to the existing pack, so the spring rate and the arch of the rear springs change. The leaf and its center pins must sit squarely, or the axle will shift under load. Stock leaves that are sagging or cracked should be replaced before the add-a-leaf goes in, since a tired pack can cause uneven height.
After installation, watch for axle wrap during hard acceleration, and check the U-bolts and center pins for looseness. Brake lines and the parking brake cable should be checked for stretch once the rear is higher. Retighten the hardware after the first few drives.
- Check leaf pack for sag or cracks
- Inspect center pins for wear
- Retighten U-bolts after first drives
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 22826KN |
| UPC | 698815032271 |
| Rear lift | 2.5 inch and 1.5 inch |
| Suspension type | Add-a-leaf |
| Rear lift method | Add-a-leaf |
| Add-a-leaf | 2 inch |
| Shocks | SX8000, included |
Vehicle fitment
It fits the 1997 Ford F-250 (Base, Lariat, XL and XLT).
Ford F-250 model years other than 1997, and the F-150 and F-350, are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The axle pivot bracket needs a bracket with four mounting holes, so check that bracket on the truck before installing the kit. Check the rear ride height after installation, since the add-a-leaf changes the rear springs.
What’s included
The kit includes SX8000 shocks, an axle pivot bracket, a U-bolt, a 2 inch rear add-a-leaf, center pins and the mounting parts for the axle pivot bracket.









