Overview
The Mag-Hytec transmission pan is an A356-T6 aluminum deep sump pan made to fit 2011 to 2017 Ford F250, F350, F450 and F550 trucks with the 6.7L automatic. It holds 5.5 quarts more fluid than the stock pan and has a powder-coated black finish.
The cast body includes machined cooling fins, and the pan is suited to recreational and service vehicles that pull heavy loads. A magnetic drain plug traps worn gear material, and the fluid can be changed without dropping the pan. A filter is not included with the pan.
Key features
- Holds 5.5 quarts more fluid than the stock pan
- Cast A356-T6 aluminum with machined cooling fins
- Powder-coated black finish
- Magnetic drain plug to trap worn gear material
- Seals with ARP 568 O-rings; gasket or sealant not usually needed
Filter selection and fluid capacity
A transmission filter sits inside the pan and traps debris before it reaches the valve body. Because this pan leaves the filter out, buy one that matches your transmission before starting the job, and inspect the old filter for metal or clutch material to judge how the transmission has been worked.
Extra fluid capacity helps when towing, since the transmission runs cooler with more fluid to absorb heat, but the fluid level must still be set correctly after the new pan is installed. Refill in small amounts, then check the level with the transmission at its normal operating temperature. Replace the fluid and filter together, and check the magnetic drain plug for debris at the first change. Trucks used for heavy loads often benefit from more frequent fluid changes.
Specifications
| Brand | Mag-Hytec |
|---|---|
| Overall height | 4 1/4 in |
| Extra capacity | 5.5 quarts over stock |
| Material | A356-T6 aluminum |
| Finish | Powder-coated black |
| Hardware | 303 stainless steel |
| Engine stated | 6.7L automatic |
| Filter | Not included |
| UPC | 70000679704 |
Vehicle fitment
It fits only 2011 to 2017 Ford F250, F350, F450 and F550 trucks with the 6.7L automatic. Confirm your vehicle’s year, model and trim before ordering.
Other Ford trucks, other engines and other model years are not covered by that statement. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The filter is not included, so a compatible filter must be obtained separately before the pan is installed. Check the 4 1/4 in overall height against the clearance on your truck before fitting.
What’s included
The transmission pan is the item described.
Not included: the filter.









