Overview
The Dorman transmission oil pan, part number 265-818, is a replacement pan for the 42RLE transmission that comes with a drain plug. The drain plug lets you change transmission fluid without loosening the pan.
The pan is made for the 42RLE transmission, so match that transmission before installing it. It is a direct replacement with a powder-coat finish designed to resist corrosion.
Key features
- Drain plug for transmission fluid service
- Direct replacement design for easier installation
- Powder-coat finish designed to resist corrosion
- Written for the 42RLE transmission
Fluid service with a drain plug
A drain plug turns a fluid change into a quick drain and refill, without disturbing the pan gasket. Use a new washer or sealing ring each time the plug is removed, and tighten it snugly rather than cranking it down hard. Clean the plug threads and check the pan bolt holes for old debris before reinstalling.
Some owners check the plug during each service for fine metal particles, which can point to normal wear or to an internal issue that needs attention. Refill slowly, check the level once the transmission is warm, and confirm the fluid type your transmission requires before adding it.
- Use a new washer or sealing ring
- Check the plug threads for damage
- Refill slowly and recheck the level
Specifications
| Brand | Dorman |
|---|---|
| Part number | 265-818 |
| UPC | 37495236188 |
| Transmission | 42RLE |
| Finish | Powder-coat |
| Included hardware | Drain plug |
Vehicle fitment
No vehicle years, models or chassis codes are listed, so this pan is not confirmed for a specific vehicle. Match the 42RLE transmission in your vehicle before installing the pan.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the pan with the one it replaces before fitting it, since bolt holes, drain location and gasket surface should line up.
What’s included
The drain plug comes with the pan. Confirm whether a gasket or bolts are needed before starting the job.









