Overview
The Pro Comp Jeep Crawler Rear Bumper with Receiver, part number 66165, is a gloss black rear bumper made from 1/4 inch plate steel for the 1987–1995 Wrangler YJ, 1997–2006 Wrangler TJ and 2004–2006 Wrangler LJ.
The bumper is designed for high departure and approach angles, and the 1/4 inch plate steel helps slide a Jeep over boulders, rocks and stumps. This version has a 2 inch receiver, which is not rated for towing, and it has no D-rings. Drilling is required on the 1997–2000 TJ Wrangler.
Key features
- 1/4 inch plate steel construction
- Designed for high departure and approach angles
- Gloss black powder coat finish
- 2 inch receiver, not rated for towing
- Version without D-rings
- Drilling required on the 1997–2000 TJ
Fitting and use on the trail
A rear bumper like this is mainly a guard for the rear corners and a mounting point for recovery gear, so its shape matters on steep terrain. The high departure angle it is designed for helps keep the rear clear of rocks and stumps when backing over an obstacle. The receiver is useful for accessories, but it is not a towing hitch.
Because the bumper adds weight at the rear, the rear springs and shocks may need checking on a heavily loaded truck. Bolts should be checked after rough trail runs, as impacts can loosen fasteners. Any cracked welds or bent plate should be repaired before the bumper is used for recovery, since the plate steel only protects as well as its mounts.
- Check the mounting bolts after rough trail runs
- Keep the receiver for accessories only
- Inspect welds for cracks after impacts
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 66165 |
| UPC | 614901694147 |
| Product type | Rear bumper with receiver |
| Position | Rear |
| Material | Plate steel, 1/4 inch |
| Finish | Gloss black powder coat |
| Receiver | 2 inch, not rated for towing |
| D-rings | None |
| Tire carrier | No |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler LJ, the 1997–2006 Jeep Wrangler TJ and the 1987–1995 Jeep Wrangler YJ.
It is not for the JK or JL Wrangler. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required on the 1997–2000 TJ Wrangler. The 2 inch receiver is not rated for towing, so it should not be used to pull a trailer.
What’s included
- Rear bumper with 2 inch receiver
Not included: D-rings and a tire carrier.












