Overview
The Mountain Off Road Enterprises SB7686Z is a heavy-duty steering box mount for 1976-86 Jeep CJ models with power steering. It is built as a heavier replacement for the factory stamped steel brackets.
The maker cites big tires, locking differentials and big rocks as the causes. The bracket is built from 1/2 inch and 3/8 inch thick steel, finished in zinc plated gold, and comes with all mounting hardware.
Key features
- Heavy-duty steel construction, 1/2 inch and 3/8 inch thick
- Zinc plated gold finish
- Designed to replace the factory stamped steel steering box mounts
- Comes with all mounting hardware
Steering box mounting basics
The steering box mount carries the load of the box and its linkage, so it is one of the most important points on the steering system. A mount that is too flexible lets the box shift under turning load, which makes the steering feel vague. Choosing a bracket with thicker steel and a solid bolt pattern helps keep the box stable over rough terrain.
Mounting bolts should be torqued to specification and checked regularly, especially after the first trips with a new install. Look for witness marks, shiny spots or elongated holes that show movement. Keeping the box clean and the linkage in good order also reduces the load on the mount over time.
- Torque bolts after the first trips
- Look for witness marks on the mount
- Check the linkage alongside the box
- Keep the bracket surfaces clean
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | SB7686Z |
| UPC | 815572020956 |
| Material | Steel, 1/2 inch and 3/8 inch thick |
| Finish | Zinc plated gold |
| Included | All mounting hardware |
Vehicle fitment
The bracket is for 1976-86 Jeep CJ vehicles with power steering. Check the year, model and trim against your CJ before ordering.
CJs without power steering and other Jeep generations are not suited to this bracket. Verify your steering setup before installing.
What’s included
All mounting hardware for the bracket is included.
