Overview
The Mountain Off Road Enterprises SB7686 is a heavy-duty steering box mount for 1976-1986 Jeep CJ vehicles with power steering. It replaces the factory stamped steel brackets that can tear off the frame once big tires, locking differentials or big rocks are added.
Made from 1/2 inch and 3/8 inch thick steel, the bracket is bare steel and comes with all mounting hardware. It suits CJ owners who run larger tires or lockers and want the steering box held more securely.
Key features
- Thick steel construction, 1/2 inch and 3/8 inch plate
- Designed to replace the factory stamped steel steering box mounts
- Built for larger tires, locking differentials and rough trail use
- All mounting hardware included
Why steering box mounts fail
The steering box takes a lot of force from the steering linkage, and that load grows when bigger tires and lockers add leverage. Factory stamped brackets can crack around the welds or pull away from the frame under repeated hard turns. A thicker mount reduces flex at the mounting points, which helps keep the steering box in position.
Before installing a new mount, clean the frame surface where the bracket sits and check that the mounting holes are undamaged. Tighten all hardware securely and recheck after the first few drives. After any tire or axle upgrade, inspect the mount and frame again for movement or cracks.
- Inspect frame around the mount for cracks
- Check steering box for movement after install
- Re-tighten hardware after the first drives
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | SB7686 |
| UPC | 815572020925 |
| Material | Steel, 1/2 inch and 3/8 inch thick |
| Finish | Bare steel |
| Included | All mounting hardware |
Vehicle fitment
The bracket is designed for 1976-1986 Jeep CJ vehicles with power steering. Confirm your vehicle’s year, model and trim before ordering.
Fit is intended for CJ models with power steering. For other setups, confirm your vehicle’s year, model and trim before ordering.
What’s included
The bracket and all mounting hardware.
Not included: A steering box brace is not included with the bracket, so source one separately if your setup calls for it.









