Overview
The Titan Tanks 65 Gallon Extra Capacity Fuel Tank, part number 7020311, is a midship replacement tank made of military grade cross-linked polyethylene. It is made for 2011–2016 Ford pickups with Crew Cabs and 8 ft beds.
It comes with a zinc-coated steel mounting strap set and extruded rubber mounting bushings, has a low fuel trap design, and hangs about 1 inch below the bottom of the shield bracket. Its look is similar to the original equipment tank.
Key features
- 65 gallon extra capacity, extra heavy duty midship design
- Military grade cross-linked polyethylene (XLHDPE)
- Zinc-coated steel mounting strap set
- Extruded rubber mounting bushings
- Low fuel trap design
- Hangs approximately 1 inch below the bottom of the shield bracket
Fitment checks before mounting
A tank hanging about an inch below the shield bracket leaves little room for error. Before mounting, check how the tank sits against the frame, exhaust and any underbody protection, and make sure nothing presses on the tank wall once the straps are tightened.
Rubber bushings allow small movement that helps prevent stress on the tank and its connections. Check that they are seated and not pinched, and make sure the straps sit flat rather than twisted. Once the tank is in place, cycle the fuel system and look for seepage at each joint.
Because the tank is large, it adds weight that changes how the truck rides. Recheck straps and bushings after the first drives and whenever the truck travels rough roads or trails.
- Measure bed length and model year first
- Check clearance under the shield bracket
- Re-check straps and bushings after early drives
Specifications
| Brand | Titan Tanks |
|---|---|
| Part number | 7020311 |
| UPC | 848135000348 |
| Capacity | 65 gallons |
| Material | Military grade cross-linked polyethylene (XLHDPE) |
| Mounting hardware | Zinc-coated steel strap set, extruded rubber mounting bushings |
| Drop below shield bracket | Approximately 1 inch |
| Cab and bed | Crew Cab, 8 ft bed |
Vehicle fitment
It is made for 2011–2016 Ford pickups with Crew Cabs and 8 ft beds. Confirm fit for your vehicle’s year, model and trim before ordering.
Short bed Ford diesel trucks are covered by a different tank, part 7020211. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the clearance about 1 inch below the shield bracket before mounting, and confirm your bed is 8 ft long.
What’s included
Zinc-coated steel mounting strap set, extruded rubber mounting bushings and accessories.
Not included: The kit does not include a shield or front support for this model, so check your existing parts before installing.











