Overview
The TIS Offroad 551BM is a 20-inch by 10-inch aluminum spoke wheel in the 551 Series, part number TIS551BM-2108925. Its black milled finish and 8 on 180 bolt pattern suit off-road hubs with that spacing.
The wheel carries a Universal Fit label and no vehicle is named. Measure your hub and compare its bolt pattern, center bore and offset with the figures in the table before deciding.
Key features
- Spoke design with a black milled finish
- Aluminum construction in a 20 x 10 inch size
- 8 on 180 bolt pattern
- Offset of -25 with a 4.52 backspacing measurement
- Part of the TIS Offroad 551 Series
Spoke wheels and cleaning
Spoke wheels have more surface area and more crevices than a solid face, so brake dust and mud collect between the spokes. Those gaps also hide the back of the spoke where the wheel meets the hub. Rinse the wheel first, then use a soft brush to work into the joints between spokes, and rinse again to lift loosened grime away from the milled surfaces.
Milled finishes look best when the cuts stay sharp and free of debris. Avoid abrasive pads that can smear the contrast, and dry the wheel afterward to prevent water spots. Inspect the spoke bases and the hub face during tire rotations, looking for cracks, bent spokes or fresh scratches that could affect how the wheel seats.
- Rinse before scrubbing between the spokes
- Use a soft brush on the milled surfaces
- Inspect spoke bases at each tire rotation
Specifications
| Brand | TIS Offroad |
|---|---|
| Part number | TIS551BM-2108925 |
| Series | 551 |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 8 on 180 |
| Offset | -25 |
| Center bore | 124.3 |
| Backspacing | 4.52 |
| Style | Spoke |
| Finish | Black/Milled |
| Construction | Aluminum |
| Fitment label | Universal Fit |
Vehicle fitment
No make, model or year is attached to this wheel. The Universal Fit label means your hub decides the match, so check the 8 on 180 pattern and 124.3 center bore first.
A wheel with the wrong bolt pattern will not seat, and a mismatched offset changes how it sits against the brakes. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the 124.3 center bore matches the hub, or plan for a hub-centric ring. A -25 offset pushes the mounting face outward compared with a positive-offset wheel, so confirm brake and suspension clearance before mounting a tire.
What’s included
One wheel is included. Tires, lug nuts and center caps are not part of this wheel.
Not included: Tires and any hub hardware your hub needs.









