Overview
The TIS Offroad 547BM is a 22-inch by 10-inch aluminum wheel in the 547 Series, part number TIS547BM-2208919, with an 8 on 180 bolt pattern. It carries a black milled finish and a directional style for off-road vehicles that run an 8 on 180 hub.
No specific vehicle is named for this wheel. It is labelled Universal Fit, so the match depends on your hub’s bolt pattern, center bore and offset rather than a model year. Check those figures against your current wheel before choosing it.
Key features
- Directional style with a black milled face
- Aluminum construction in a 22 x 10 inch size
- 8 on 180 bolt pattern
- Offset of -19 with a 4.75 backspacing measurement
- Part of the TIS Offroad 547 Series
Hub centering and rings
Center bore is the hole that sits over the hub, and it decides how the wheel is located. When the bore is larger than the hub, a hub-centric ring fills the gap so the load passes through the hub rather than the lug studs. A bore that is too small will not seat at all, so measure both before the wheel is mounted.
Test-fitting matters on a directional off-road wheel because the face and spokes sit close to brake parts. Mount the wheel with the tire on, turn the steering to full lock, and check for rubbing at the caliper and suspension. Clean the hub face of rust and debris first, since any buildup can keep the wheel from sitting flat.
- Clean the hub face and studs before mounting
- Tighten lug nuts in a star pattern
- Check caliper clearance with the tire on
- Keep the wheel balanced after any tire service
Specifications
| Brand | TIS Offroad |
|---|---|
| Part number | TIS547BM-2208919 |
| Series | 547 |
| Wheel diameter | 22 inches |
| Wheel width | 10 inches |
| Bolt pattern | 8 on 180 |
| Offset | -19 |
| Center bore | 124.3 |
| Backspacing | 4.75 |
| Style | Directional |
| Finish | Black/Milled |
| Construction | Aluminum |
| Fitment label | Universal Fit |
Vehicle fitment
No make, model or year is attached to this wheel. Because it is labelled Universal Fit, confirm the 8 on 180 bolt pattern, 124.3 center bore and -19 offset against the hubs on your vehicle.
Wheels with a different bolt pattern, offset or center bore will not mount correctly even when diameter and width match. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 124.3 center bore with your hub before mounting: a smaller hub will not seat the wheel, and a larger hub needs a hub-centric ring. Test-fit the wheel and check clearance to brakes and suspension before a tire goes on. Wheel fitment errors can cause loss of control, so verify it first.
What’s included
This item is one wheel. Tires, lug nuts and center caps are not part of it.
Not included: Tires, plus any lug nuts or center caps the hub needs, are not part of this item.









