Overview
The TIS Offroad 544C is a 20×10-inch chrome aluminum directional wheel from the 544 Series, part number TIS544C-2106825. It runs a combined 6 on 5.5/6 on 135 bolt pattern.
The 10-inch width and -25 offset set where the face sits relative to the fender, so measure clearance before mounting. A 108 center bore and 4.52 backspacing complete the mounting measurements.
Key features
- Chrome finish on aluminum construction
- Directional style with a set rotation side
- 20-inch diameter and 10-inch width
- Combined 6 on 5.5/6 on 135 bolt pattern
- Second bolt pattern of 6 on 135 also listed
Chrome wheels and road care
Chrome plating looks sharp when new, but it is more exposed to road salt, grit and brake dust than painted finishes. Those contaminants can etch the surface if they sit for long periods. Washing the wheels regularly with a non-abrasive cleaner helps keep the reflection clear and protects the plating from pitting.
Directional chrome wheels also need careful mounting. The rotation side should match the mounting position, and bead seats should be cleaned before the tire goes on. Metal tools can scratch chrome in seconds, so use plastic or rubber tools and a soft cloth on the face and lip.
After installation, check the lug nut torque once the wheel has been driven a short distance, then again after the first few trips. Chrome wheels make small scratches more visible, so inspect the face and spokes after trail use and touch up any chips before they spread.
- Non-abrasive cleaner for chrome
- Plastic or rubber mounting tools
- Rotation side matched at mounting
- Lug nut check after the first drives
Specifications
| Brand | TIS Offroad |
|---|---|
| Part number | TIS544C-2106825 |
| Series | 544 |
| Diameter | 20 inches |
| Width | 10 inches |
| Offset | -25 |
| Center bore | 108 |
| Backspacing | 4.52 |
| Bolt pattern | 6 on 5.5/6 on 135 |
| Second bolt pattern | 6 on 135 |
| Style | Directional |
| Finish | Chrome |
| Construction | Aluminum |
Vehicle fitment
The fitment field reads Universal Fit and names no make, model or year for this wheel. Bolt pattern, center bore and offset have to be confirmed against the vehicle itself.
Check which vehicles the manufacturer intends this wheel for. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the directional face so its rotation matches the side of the vehicle it is used on. Confirm the hub fit and clearance before the final torque, and keep chrome surfaces clear of abrasive tools.
What’s included
Only one wheel is included. Caps, lug nuts and tires are not part of this item.
Not included: Tires and lug hardware must be sourced separately.









