Overview
The Timbren Active Off-Road front bump stop ABSGMFCC is made for the 2015–2016 Chevrolet Colorado and GMC Canyon. It replaces the front bump stops on these trucks.
The bump stop uses progressive-rate springs, so axle energy is absorbed at the end of travel instead of hitting a hard stop. The natural rubber compound is designed to outlast factory bump stops and to give smooth, predictable and quiet axle engagement and disengagement.
Key features
- Progressive-rate action at the end of axle travel
- Smooth, predictable and quiet engagement and disengagement.
- Natural rubber compound
- Lifetime warranty and satisfaction guarantee
- Front position
Before installing
The front bump stop works as the last point of travel on the axle, so its condition affects ride quality over washboard and on rough terrain. Worn rubber can feel firm and abrupt, while a stop that still compresses evenly helps the suspension settle. Compare the replacement’s position against the old stop before removing anything so the new one seats correctly.
Front stops are often inspected along with the shocks and springs, since wear there changes how the stop engages. Vehicles with added height or larger tires may reach the stop sooner, so review the setup if the truck has been modified. Keep an eye on the mounting hardware and recheck it after the first drives.
- Clean the mounting surface before fitting the new stop
- Check the old rubber for cracks or flat spots
- Compare the new stop position with the old one
- Recheck mounting bolts after initial trail use
Specifications
| Brand | Timbren |
|---|---|
| Part number | T/IABSGMFCC |
| Type | Rubber bump |
| Position | Front |
| Warranty | Lifetime warranty and satisfaction guarantee |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2015–2016 Chevrolet Colorado in LT, WT and Z71 trims, and the 2015–2016 GMC Canyon in Base, SLE and SLT trims.
Fit covers 2015 and 2016 model years. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The stop replaces the factory front bump stop on the Colorado and Canyon. Check the front height and stop engagement after installation.









