Overview
The TeraFlex Vacuum Pump Relocation Bracket (part number 4403100) moves the factory 3.6L VVT vacuum pump from the front crossmember into the engine bay on 2012-2015 Jeep Wrangler (JK) models.
The bracket is used when an aftermarket bumper or winch is mounted on a 2012 or later JK, since the pump may need to be relocated. Some vacuum tube re-routing is required.
Key features
- Moves the 3.6L VVT vacuum pump into the engine bay
- Designed for aftermarket bumper or winch installs on 2012 and later JK models
- It places the pump in a secure location in the engine bay.
- Vacuum tube re-routing is required
Vacuum lines and tube routing
The vacuum system on a 3.6L engine runs small rubber lines that tolerate only so much bending and heat. When a pump is moved, every line that reaches it has to be measured, cut or extended to fit the new position without kinking. Keep the original tube ends and clamps so nothing has to be guessed at during the change.
Heat matters in the engine bay. Keep lines away from exhaust-side components, the alternator and moving belts. Use proper clamps and inspect the tubing for cracking after the first heat cycles, since hardened rubber leaks slowly and the symptoms can be subtle, like a rough idle.
Accessories mounted to the front end also change the airflow and the space around the engine. Recheck clearance around the radiator and cooling fan after the bumper or winch is installed, and make sure cables and wiring have a clear path.
- Label each line before disconnecting it
- Inspect tubing for cracks after the first drive
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4403100 |
| UPC | 843885028826 |
| Engine | 3.6L VVT |
| Pump location | Moved from front crossmember to engine bay |
Vehicle fitment
It fits 2012-2015 Jeep Wrangler (JK) models, including Rubicon, Sahara and Sport trims and their Unlimited versions.
2007-2011 JK models are not covered, and the fit ends at 2015. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Plan for vacuum tube re-routing, which is required with this bracket, before the pump is moved into the engine bay.
What’s included
Check the package contents against your installation before starting.









