Overview
The TeraFlex Roll Cage Anchor Plate, part number 4909104, is a cage foot plate used as a mounting plate for building custom roll bars and cage kits. TeraFlex marks it universal fit, and it is not tied to a named vehicle.
Building a roll cage mount
A cage foot plate transfers load from the roll bar into the frame or body, so it is one of the most loaded points in the build. The plate needs to sit flat, be fastened or welded correctly, and line up with the tubing and gussets it supports. Small alignment errors can put stress on a single point.
Plates should be inspected before and after trail use. Look for cracks around holes and welds, bent edges, and fasteners that have loosened. Any plate that shows cracking or distortion should be replaced rather than reused, and a qualified fabricator should review the design.
- Confirm the plate sits flat before fastening
- Inspect welds and holes for cracks
- Replace any plate that shows distortion
- Have a fabricator review the build
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4909104 |
| UPC | 843885005377 |
| Type | Cage foot plate |
| Use | Mounting plate for custom roll bars and cage kits |
| Fitment | Universal fit |
Vehicle fitment
TeraFlex marks this plate as universal fit. No vehicle years, models or trims are named.
Plate fit depends on the roll bar or cage being built, so check the TeraFlex specifications for your build. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Roll bar and cage work is structural, so have a qualified fabricator review the build before the plate is used.
What’s included
Check the package contents against your build plan before starting.
Not included: The roll bar tubing and cage kit parts the plate is used with.












