Overview
The TeraFlex Falcon Nexus EF 2.2 Fast Adjust steering stabilizer (part number TER01-02-22-110-1582) is a single Jeep-specific stabilizer for 2007–2018 Jeep Wrangler JK models. Its Fast Adjust knob has three compression settings, soft, medium and firm, for large damping adjustments.
The Falcon Performance line is built as high-value performance damping for Jeeps, trucks and SUVs. This stabilizer provides a properly weighted steering feel, consistent bi-directional turning and an equal return to center for balanced, controlled side-to-side steering.
The Fast Adjust version suits daily-driven Jeeps and drivers who want to tune damping for changing conditions. It is a JK-specific steering stabilizer, so it is designed around the JK front end.
Key features
- Fast Adjust knob with three compression settings
- Settings for soft, medium and firm damping
- Large damping adjustments
- Properly weighted steering feel
- Consistent bi-directional turning
- Equal return to center dynamics
Signs the old stabilizer is worn
A worn steering stabilizer often shows up as wander on the highway, a loose or shaky feel at the wheel and a clunk when turning over rough ground. These symptoms can also come from worn tie rod ends or ball joints, so inspect those parts before replacing the damper.
Because this is a Fast Adjust type, check that the knob turns freely and holds firmly at each position. A knob that slips or feels loose can change damping unexpectedly. Keep the stabilizer clean and inspect its seals and mounting hardware on a regular schedule, especially after deep water or mud use.
- Test the knob at each of its three settings
- Inspect the body for leaks at the seals
- Check mounts for play and cracked bushings
- Look at tie rod ends and ball joints during the same inspection
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER01-02-22-110-1582 |
| Series | Falcon Nexus EF 2.2 Fast Adjust |
| Adjustment | Three compression settings: soft, medium, firm |
| Tie rod sizes | Stock 1-3/8 inch, or heavy-duty 1-1/2 inch or 1-5/8 inch |
| Single or dual | Single |
| Type | Stabilizer only |
| Fitment | Direct fit |
Vehicle fitment
Fitment covers 2007–2018 Jeep Wrangler JK models in the 70th and 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, in 2-door and Unlimited 4-door form.
The list does not include the 2019 JL or any Wrangler outside the JK years, and it does not cover the Gladiator. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The tie rod size on your Jeep decides which version fits, since the product is offered for the stock 1-3/8 inch tie rod or for heavy-duty 1-1/2 inch or 1-5/8 inch tie rods. Measure the tie rod before ordering.
What’s included
One Falcon Nexus EF 2.2 Fast Adjust steering stabilizer. Brackets and other hardware are not included, so plan for mounting hardware before installing.









