Overview
The TeraFlex D-Ring Mount, part number 4603300, is a bolt-on D-ring mount kit designed for the TeraFlex Rockguard TJ/YJ front bumper. It is the TeraFlex receiver-free option for a front-mounted recovery point on those bumpers.
The kit can be used in other applications, though some drilling for the mounting holes may be needed. Its TJ and YJ fit is tied to the TeraFlex Rockguard TJ/YJ front bumper.
Key features
- Bolts directly to the TeraFlex Rockguard TJ/YJ front bumper
- Includes D-ring mount, backing plate and hardware
- Backing plate adds strength to the mount
- Sold in pairs
Front bumper recovery setup
A bumper-mounted D-ring puts the recovery point at the front of the vehicle, which keeps the strap close to the line of pull. The backing plate spreads load across the bumper face, so the bolts are not carrying the full force alone. Before installing, check the bumper for cracks, rust, and loose mounting points. Any sign of damage in the bumper itself will limit how safely the mount can be used.
Bumper mounts see both straight and angled pulls, and the bumper and frame share the load. Tighten the hardware after the first few trail runs, since bolts can settle under vibration. Keep the strap path clear of sharp bumper edges, and inspect the mount after any hard recovery. If your vehicle has added bumper parts or a winch, check that the mount still has clearance before you pull.
- Check the bumper for cracks before installing
- Re-tighten bolts after the first trail runs
- Inspect the backing plate after hard pulls
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4603300 |
| UPC | 843885005049 |
| Included | D-ring mount, backing plate, hardware |
| Quantity | Sold in pairs |
| Bumper match | TeraFlex Rockguard TJ/YJ front bumper |
Vehicle fitment
The mount is tied to the TeraFlex Rockguard TJ/YJ front bumper, which fits Jeep Wrangler YJ (1987-1995) and TJ (1997-2006). Confirm your vehicle’s year, model and trim before ordering.
This mount is designed for the TJ/YJ bumper, so other Wrangler generations are not the intended match. Other applications may need drilling.
Installation notes
On the TeraFlex Rockguard TJ/YJ front bumper, the mount bolts on directly. Use the backing plate with the mount for strength. Other applications may require drilling mounting holes, so check the bumper before starting.
What’s included
The kit comes with the D-ring mount, a backing plate for strength, and hardware. It is sold in pairs.









