Overview
The Rugged Ridge Receiver D-Ring Shackle Bracket, part number 11234.01, is a heavy-duty steel bracket that fits into a 2-inch receiver box and holds a shackle for a recovery point. It is listed among receiver hitch D-ring mounts.
The bracket is rated up to 9,500 lbs of pulling capacity, but only on evenly distributed straight pulls. It is not designed for towing, and your receiver’s capacity must never be exceeded.
Key features
- Heavy-duty steel construction
- Fits any 2 inch receiver box
- Rated up to 9,500 lbs on evenly distributed straight pulls
- Not designed for towing
- Hitch pin not included
Straight pulls and receiver care
Recovery brackets work best when the load runs straight through the receiver. Side-on or angled pulls push force into the bracket walls and the receiver tube, which can bend the mount or wear the opening over time. Before a pull, line the vehicle up so the strap runs in the same direction as the bracket. Steel holds up well to repeated use, but it still needs regular checks for bends, cracks, and rust where it meets the receiver.
Sudden jerks are harder on any recovery point than a slow, steady pull. Keep the strap path clear of sharp edges, and use a shackle that fits the bracket without forcing it in. If the bracket starts to rattle in the receiver, stop and tighten or replace the pin before going on. Keep a spare pin in the vehicle, since a missing pin can stop a recovery before it starts.
- Keep the pull straight through the receiver
- Inspect the bracket for cracks after hard use
- Carry a spare hitch pin
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11234.01 |
| UPC | 804314076047 |
| Material | Steel |
| Receiver size | 2 inch receiver box |
| Pulling capacity | Up to 9,500 lbs on evenly distributed straight pulls |
| Hitch pin | Not included |
Vehicle fitment
It is sized for a 2-inch receiver box, so compatibility depends on your receiver hitch rather than the vehicle model. Confirm the receiver’s rated capacity before use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Insert the bracket into the 2-inch receiver box and use a hitch pin that fits your receiver. Pull straight with the load evenly distributed, and never exceed your receiver capacity.
What’s included
The bracket is the item described on this product. The hitch pin is not included.
Not included: hitch pin.












