Overview
The Crown Automotive 68003777AA is a disc brake caliper pin kit for the rear brakes, with 2 pins and 2 boots for the driver or passenger side. Crown Automotive makes replacement parts for Jeep vehicles, and this kit is marked as a direct fit for 2-door and 4-door models.
Caliper pins hold the brake pads in place and guide the caliper as it moves, so a kit like this is used when the pins or boots need replacing. No year, model or trim is given for this kit, so check the vehicle match before choosing it.
Key features
- Rear position, driver or passenger side
- Two caliper pins and two boots in one kit
- Direct fit for 2-door and 4-door models
- Replacement part from a brand with over 8,000 part numbers
Caliper pin care
Caliper pins and their boots keep the caliper moving freely over the bracket, so the pads wear evenly and the brake releases fully. When a boot tears, dirt and moisture reach the pin and can cause it to seize. A seized pin often shows up as uneven pad wear, a pulling feel under braking or a caliper that drags after the pedal is released.
Lubricate the pins with grease suited to brake caliper service, and use only enough to coat the pin. Clean the bracket bores before reinstalling, and check that the pins slide smoothly by hand. Pads and rotors are often inspected at the same time, since sticking pins can damage both.
- Check boots for cracks or tears at each pad change
- Clean the bracket and pin bores before reassembly
- Replace pins that bind, pit or wear unevenly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 68003777AA |
| UPC | 848399091908 |
| Position | Rear, driver or passenger side |
| Models listed | 2-door and 4-door |
| Contents | 2 pins, 2 boots |
Vehicle fitment
It is a direct fit for 2-door and 4-door models. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two pins and two boots, for the driver or passenger side rear.









