Overview
The Omix-ADA 16748.02 is a front left disc brake hardware kit for a 2 bolt caliper. It fits the 1978–1979 Jeep CJ5 and CJ7.
A disc brake hardware kit gathers the small parts that hold a caliper and its pads in place. Omix-ADA makes this one as a direct OE replacement built to the original specifications, and it backs the line with a limited five year manufacturers warranty.
About this part
Hardware kits are often overlooked until a caliper starts to stick or rattle. This kit is for a 2 bolt caliper on the front left, matching the early disc brake design on the CJ5 and CJ7. Replacing worn hardware when the pads are changed helps the caliper seat properly and keeps the pads from binding. Compare the old hardware with the new before fitting, and check that the caliper still moves freely on its mounts afterward. The kit carries a limited five year warranty and fits the CJ5 and CJ7 in Base, Golden Eagle and Renegade trims.
Key features
- Disc brake hardware kit for a 2 bolt caliper
- Front left position
- Direct fit for early CJ5 and CJ7 models
- Built to the original specifications
- Limited five year manufacturers warranty
Pads, rotors and hardware
Hardware clips and shims control how pads sit in the caliper bracket, and worn clips can allow pads to rattle or chatter under braking. Replacing them at each pad change keeps the pads positioned evenly against the rotor. Check each clip for bends, corrosion or cracks before reuse, and replace any that look fatigued.
Rotors and calipers should be inspected at the same time, since a worn rotor can cause the same symptoms as worn hardware. Clean the mounting surfaces and remove rust before fitting new hardware. Keep the caliper slide pins free and well lubricated so the pads release fully when the pedal is released.
- Check clips for bends or cracks
- Clean mounting surfaces before fitting
- Inspect the rotor at each pad change
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16748.02 |
| UPC | 804314072070 |
| Product type | Disc brake hardware kit |
| Brake position | Front left |
| Caliper design | 2 bolt caliper |
| Fitment type | Direct fit |
| Warranty | Limited five year manufacturers warranty |
Vehicle fitment
The manufacturer fitment list for the Omix-Ada 16748.02 includes the following vehicles and trims:
- 1978–1979 Jeep CJ5 (Base, Golden Eagle, Renegade)
- 1978–1979 Jeep CJ7 (Base, Golden Eagle, Renegade)
The list covers the 1978–1979 CJ5 and CJ7 only; it does not include 1980 and later CJ models or the Wrangler. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Disc brake hardware kit with the small parts that hold a caliper and its pads in place.
Not included: Calipers, pads and rotors.









