Overview
The Crown Automotive J3229032 is a front brake caliper support key that fits the driver or passenger side. It fits the 1978–1981 Jeep CJ5 and CJ7 and the 1981–1984 Jeep Scrambler.
A caliper support key is a small retaining piece that locates the caliper in its support. One part number covers both front sides. Such parts are useful on older Jeeps where originals are harder to find.
About this part
A caliper support key is a small steel piece that sits between the caliper and its support on certain older disc brake designs, locating the caliper so it cannot shift. Over many years keys can wear or corrode, and the caliper may then clunk or sit loosely. This part number covers both driver and passenger sides, which keeps ordering simple. It fits the 1978–1981 CJ5 and CJ7 and the 1981–1984 Scrambler, so check your year first. Check how the key fits your vehicle before ordering, because the CJ and Scrambler lines used several brake designs over the years.
Key features
- Front brake caliper support key
- Fits the driver or passenger side
- Direct fit replacement
- For classic Jeep CJ5, CJ7 and Scrambler models
Caliper support hardware
On early Jeep disc brakes, the caliper must stay located in its support as the pads wear and the brakes are applied. Support keys, clips and pins share that job, and a worn key can allow small movements that wear the pads unevenly or produce a clunk over bumps. When keys are replaced, the mating surfaces on the caliper and support also deserve a look, because a worn bore or bent tab can make a new key sit loosely.
Replace support hardware in pairs or sets where the design calls for it, and do not mix old and new pieces without checking fit. Clean rust from the support before installing the new key, and apply a light coat of brake-safe lubricant where the service procedure recommends it. Pads and hardware are often changed in the same job, so inspect the pad slides and retaining springs at the same time.
- Look for wear grooves or rust on the support key
- Clean the caliper support before fitting
- Check the pad slides for smooth movement
- Confirm the caliper seats without play before driving
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3229032 |
| UPC | 848399060256 |
| Product type | Brake caliper support key |
| Brake position | Front, driver or passenger side |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Crown Automotive J3229032 includes the following vehicles and trims:
- 1978–1981 Jeep CJ5 (Base, Golden Eagle, Laredo, Renegade)
- 1978–1981 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Renegade)
- 1981–1984 Jeep Scrambler (Base, SL, SR)
The list covers the CJ5, CJ7 and Scrambler only for the years shown; it does not include the Wrangler YJ or later models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front brake caliper support key.
Not included: Calipers, pads and other brake hardware are not part of the package.









