Overview
The Omix-ADA 16748.03 is a front left disc brake hardware kit for a 2 bolt caliper plate. It fits the Jeep Cherokee (XJ), CJ5, CJ7, Scrambler and Wrangler (YJ).
This kit is for a 2 bolt caliper plate, so it is not interchangeable with the 16748.02 kit, which is built for a 2 bolt caliper. It is a direct OE replacement and carries a limited five year warranty.
About this part
This hardware kit is for the 2 bolt caliper plate design at the front left position. A caliper plate is the bracket the caliper hangs from, so the hardware here holds the plate and the pads in place. Fitment covers the CJ5, CJ7, Scrambler, XJ and YJ, since Jeep used similar front brake parts across those years. Caliper and caliper plate are separate parts, so identify which one you have. Some early Jeeps bolt the caliper to a plate that is attached to the knuckle, and that hardware differs from the direct mount style. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Disc brake hardware kit for a 2 bolt caliper plate
- Front left position
- Direct fit
- Fitment across XJ, CJ5, CJ7, Scrambler and YJ models
- Limited five year manufacturers warranty
Choosing the right kit
A brake hardware kit usually includes the clips, pins and springs that hold the pads in the caliper or caliper plate and keep them from rattling. Those small parts wear, lose tension and corrode, and a worn set can let pads shift or make noise under braking. When replacing the kit, check the caliper plate for cracks and corrosion, and clean the mounting surfaces so the new parts seat flat.
Before buying, identify whether your front brakes use a caliper plate or a direct mount caliper, since that decides which hardware fits. Compare the old parts with the new kit one by one, and do not reuse hardware that is bent or flattened. Replacing the pads and kit together at the same wheel keeps wear even on that side.
- Confirm the caliper mount style before buying
- Inspect the caliper plate for cracks and corrosion
- Replace the pads and hardware at the same wheel together
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16748.03 |
| UPC | 804314072087 |
| Product type | Disc brake hardware kit |
| Brake position | Front left |
| Caliper design | 2 bolt caliper plate |
| Fitment type | Direct fit |
| Warranty | Limited five year manufacturers warranty |
Vehicle fitment
The manufacturer fitment list for the Omix-Ada 16748.03 includes the following vehicles and trims:
- 1984–1989 Jeep Cherokee (XJ) (Base, Chief, Laredo, Limited, Pioneer, Sport)
- 1982–1983 Jeep CJ5 (Base, Laredo, Limited, Renegade)
- 1982–1986 Jeep CJ7 (Base, Laredo, Limited, Renegade)
- 1982–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR)
- 1987–1989 Jeep Wrangler (YJ) (Base, Islander, Laredo, S, Sahara, Sport)
The list covers the years shown for each model; it does not include the TJ or later Wrangler models or the 1990–2001 Cherokee. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A disc brake hardware kit. Check the package contents against your installation before starting.
Not included: Calipers, caliper plates, pads and rotors.









