Overview
The TeraFlex Alpine IR Rear Upper Long Arm Pair, part 1418550, is the rear upper long arm set for the 2020-2026 Jeep Gladiator (JT). It is designed to work with the matching rear lower arms, part 1418560.
The arms offer adjustable alignment and dependable operation, with IR bushings that allow unrestricted rotation and flex. The IR design is the reason the arms can move freely through suspension travel.
The arms are made for JT models with a suspension lift. They can be fitted alongside any existing suspension lift, which suits owners who already run one.
Key features
- Pair of rear upper long arms
- IR flex joint bushings with unrestricted rotation
- Maintenance-free bushings
- Damps noise, vibration and harshness on road and off road
- Can be added to any existing suspension lift
Long arms and bushing care
Long upper arms control the axle’s position in the fore-and-aft direction, which affects how the axle tracks through suspension travel and how the drivetrain angles look. Mounting points matter, so the brackets and their fasteners should be checked after installation and again after the first few trips. A bracket that has moved can change the arm’s geometry and the feel of the steering.
IR bushings are designed to rotate and flex freely, so they tolerate articulation without binding. Check them for cracks, tears and any play at the sleeve, and keep dirt and mud out of the joint where possible. Any change in ride quality, a clunk on articulation or uneven tire wear should prompt a closer look at the arms and their brackets.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1418550 |
| Position | Rear upper |
| Type | Tube long arm |
| Joint design | Flex joint with IR bushings |
Vehicle fitment
TeraFlex lists these rear upper arms for the 2020-2026 Jeep Gladiator (JT), in trims including Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport and Willys.
This pair is for the 2020-2026 Jeep Gladiator JT. Verify the year and trim against your vehicle before ordering.
Installation notes
TeraFlex says these arms must be used with the Long Arm Bracket Kit, part 1968000, on JT models.
What’s included
The pair of rear upper long arms is the included part. The Long Arm Bracket Kit, part 1968000, is sold separately.
Not included: the Long Arm Bracket Kit, part 1968000.









