Overview
The Borgeson Steering 526464 is a steering universal joint with a steel pin and block design and a 1 1/4 in. OD. It has 3/4 in. Smooth Bore ends on both sides, so it joins two smooth bore shafts of that size. No vehicles are named for it here.
Key features
- Steel pin and block design
- 1 1/4 in. OD body
- Matching 3/4 in. Smooth Bore ends
Smooth bore shaft fit
Smooth bore ends depend on a clamp or pinch bolt rather than flats or splines to hold the joint in place. The bore must be round and clean, and the shaft must be the correct diameter for a snug fit. Measure the shaft and bore before assembly, since a bore that is oval or worn can let the joint walk under load.
Pins and blocks in a steel joint wear with use, especially in dusty or wet conditions. Inspect the pin and block area for play, rust or cracks, and replace the joint if movement appears. Keep the clamp bolts tight and check them periodically, because a loose bolt can let a smooth bore joint slip out of position.
- Confirm the bore is round
- Check pin and block for play
- Recheck clamp bolts periodically
Specifications
| Brand | Borgeson Steering |
|---|---|
| Part number | 526464 |
| UPC | 843975003382 |
| Joint type | Steering universal joint |
| Construction | Steel pin and block |
| Outside diameter | 1 1/4 in. OD |
| End one | 3/4 in. Smooth Bore |
| End two | 3/4 in. Smooth Bore |
Vehicle fitment
No year, make or model appears for 526464. Shaft diameter and the smooth bore size are the practical checks to make.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting, including any pins, clamps or shafts the connection needs.





