Overview
Borgeson Steering part 154925 is a single steering universal joint in stainless steel. It joins a 3/4 in. Double D end to an 11/16 in. -36 Spline end and is built as a vibration reducer combination. Confirm the ends against your existing hardware before ordering.
Key features
- Single universal joint design
- Vibration reducer combination
- Stainless steel construction
- Double D end paired with a spline end
Before you buy a steering joint
A steering universal joint carries rotation from the column to the gear across an angle, so small mismatches show up as play, vibration or stiff turning. Measure the splines or Double D flats on your existing shaft and gear before relying on any part number. Both ends have to suit their mating parts, and a joint that fits one side but not the other will not work.
Worn joints usually announce themselves. Look for play at the wheel before the front tires respond, clicking on tight turns, or a steering feel that changes with speed. Inspect the pinch bolts and clamp faces whenever the joint is removed, and replace any fastener with stripped threads or a deformed clamp surface.
- Count the spline teeth on the mating shaft
- Recheck the Double D fit before installing
- Replace the pinch bolts if threads are damaged
Specifications
| Brand | Borgeson Steering |
|---|---|
| Part number | 154925 |
| UPC | 843975011578 |
| Joint type | Single steering universal joint |
| Design | Vibration reducer combination |
| Material | Stainless steel |
| End one | 3/4 in. Double D |
| End two | 11/16 in. -36 Spline |
Vehicle fitment
The two end sizes, 3/4 in. Double D and 11/16 in. -36 Spline, are the only fit guide for 154925. A Double D end and a spline end use different mating parts, so each side needs its own match.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Only the single universal joint is included. Shafts, bolts and adapters are not included with it, so plan for those separately.





