Overview
The Rigid Industries SR2-Series Specter LED light bar is a 10-inch, low-profile, diffused LED light bar with 15 white LEDs rated at 52.4 watts. It is a two-piece set and is universal fit, so no single vehicle applies to it.
The bar uses a hybrid spot optic that projects almost 1000 ft. A plug and play wiring harness and switch come with it, and the cast bracket holds the bar in place.
Key features
- Ultra low power use with patented optics
- Hybrid spot beam that projects almost 1000 ft
- Unbreakable polycarbonate lens and housing
- Polyester powdercoat finish
- Instant on and off with no warm-up time
- IP68 rating, with no hot spots or bouncing beams stated
- Rated life of 50000 hours, compared with 1000 hours for halogen and 5000 hours for xenon
Beam pattern and mounting tips
A hybrid spot optic gives a long, focused beam with some side spread, which suits highway speeds and open trails. Mount the bar where the beam can reach the road ahead without being blocked by the hood or roof racks. A low profile helps the bar clear obstacles, but it also means the lens sits close to road debris, so keep it clean.
The power draw is low compared with older lighting, so a plug and play harness is a practical way to connect the bar. Check that the switch is mounted within reach and that the harness is routed away from moving parts. The housing is sealed to a high ingress rating, yet the lens should still be inspected after deep water crossings.
- Aim the beam level on a flat surface
- Check the bracket after the first few trips
- Keep the harness clear of heat sources
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774029844 |
| Length | 10 in |
| Lens | Diffused |
| Profile | Low profile |
| Power | 52.4 watts |
| LEDs | 15 white |
| Pieces | 2 |
| Input voltage | 7 to 36 VDC |
| Rated life | 50000 hours |
| Ingress rating | IP68 |
| Housing | Unbreakable polycarbonate |
| Finish | Polyester powdercoat |
| Bracket | Cast |
| Wiring | Plug and play harness with switch |
| Fitment | Universal fit |
Vehicle fitment
The SR2-Series Specter is universal fit, so it is not vehicle-specific. Confirm that the 10-inch length and cast bracket suit your mounting area.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Connect the plug and play harness and switch as supplied, and check local road-use rules before mounting the bar on a street-driven vehicle.
What’s included
Two-piece set with the light bars, plug and play wiring harness, switch and cast bracket.









