Overview
The Rigid Industries E2-Series LED light bar, part number 173713, is an LED light bar with a Spot beam and a size of 0 to 10 inches. It is universal fit, meaning it is not designed for one specific make, model or year, and it suits off-road use.
The E2-Series sits within the wider E-Series lineup, which Rigid Industries positions as one of its most versatile lighting solutions. The E-Series PRO gained up to 111% more raw lumens from recent LED upgrades, along with new branding and blacked-out circuit boards. The line also suits power sports, marine, general automotive and first responder work.
Key features
- Spot beam type for concentrated forward light
- Up to 111% more raw lumens for the E-Series PRO line
- Clear lens with LED bulb type
- Bracket mounting type with a size of 0 to 10 inches
- Universal fit, not tied to one vehicle
- Suited to off-road, power sports, marine, general automotive and first responder use
Mounting and aim
A spot beam throws its output far down the trail or road ahead, so mounting position and aim shape how useful the bar becomes. Place it where it clears the hood edge, wiper arms and any airflow to the radiator. Temporary clamps let you check the aim at night before drilling fixed holes, and a level surface helps set the angle evenly on both sides of the vehicle.
Wiring is the other half of a dependable setup. A fused relay with a switch keeps high current away from the dash controls, and a clean ground to bare metal prevents dimming and flicker. Route cable through grommets where it passes sheet metal, and keep it away from exhaust heat and sharp edges. After the first few trail runs, check the bracket bolts and connectors, because vibration loosens hardware on any bar.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 173713 |
| UPC | 849774029202 |
| Lens color | Clear |
| Bulb type | LED |
| Beam type | Spot |
| Mounting type | Bracket |
| Size | 0 to 10 inches |
| Quantity sold | Single |
| Fitment | Universal fit |
Vehicle fitment
Universal fit means this light bar is not matched to a particular year, model or trim. Mounting depends on the bracket and the space available on your vehicle, and the 0 to 10 inch size should be measured against that space before installing.
Because no vehicle is named, check the bracket against your own vehicle rather than a model list. Confirm your vehicle’s year, model and trim before installing.
Installation notes
Run the light bar through a fused relay and switch rather than straight from the battery. Local road-use rules govern driving lights, so confirm them before using the light bar on public roads. Cut power at the battery before routing any cables.
What’s included
The light bar is sold as a single unit with a bracket mounting type.
Not included: A wiring harness, switch, relay and mounting hardware are not part of the package and need to be sourced separately.









