Overview
The Rigid Industries SR-M Series LED Back Up Light is a kit of two diffused single-row mini lights, each in a 6064 aluminum housing. The kit includes an extended wire harness and the necessary hardware, so the back up lights can be installed from one package.
The SR-M back up lights use an OE-quality build with a durable polycarbonate lens and a GORE pressure equalizing vent. They are IP68 certified, produce zero UV emissions and carry a 50,000-hour lifespan. The lights start instantly with no warm-up and are RoHS compliant.
Key features
- Diffused single-row mini design
- Extended wire harness and necessary hardware
- 6064 aluminum housing
- Durable polycarbonate lens
- GORE pressure equalizing vent
- IP68 certified, RoHS compliant, zero UV emissions
Rear-mount back up light tips
Back up lights are often regulated, so check local rules on brightness, color and when the lights may operate before wiring them. Wire the lights so they switch on only with reverse, using the extended harness to reach the reverse circuit cleanly. Keep the connections dry and well clear of the trailer hitch or other parts that could snag the wire.
Mini back up lights are small, so the mounting spot matters for visibility and for keeping the lens clean. A rear panel with a flat face and room behind it makes the cut easier to seal. Check the seal after car washes or deep water crossings, and replace the seal if the housing shows moisture inside.
- Route the harness away from hitch parts
- Confirm reverse-only switching
- Inspect the seal after water crossings
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774016943 |
| Series | SR-M Series |
| Sold as | Kit with 2 LED lights |
| Light type | LED back up light, single row mini |
| Beam pattern | Diffused |
| Housing | 6064 aluminum |
| Lens | Durable polycarbonate |
| Ingress rating | IP68 certified |
| Rated life | 50,000 hours |
Vehicle fitment
This kit is not made for one vehicle, so the rear panel of each vehicle has to be checked before fitting. The flush mount needs a cut that matches the mini housing.
Installation notes
Use the extended wire harness for a clean run to the reverse circuit, and fit the lights with the included hardware. Route the cable away from moving parts, and check local rules on back up lights, which are often regulated, before wiring them to a road-going vehicle.
What’s included
The kit includes two diffused single-row mini LED lights, an extended wire harness and the necessary hardware.









